|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-27-2019, 04:29 AM | #1 |
Senior Member
Join Date: Feb 2012
Location: Gladstone QLD Australia
Posts: 324
|
6 Volt Erath Issue
Well I know you barners have always advised on a good earth and starter cable size. Well I now have the same advise.
Ever since I've had my 33 I always had a problem starting cold & more so when hot. I got jack of it and checked out all that you have advised. 1. The earth went to the chassis, just a platted strap. 2. The only to the earth to the engine was another small platted strap to the mounting bolt of the starter. 3. A battery isolator installed on the firewall with 600mm leads battery to starter typical 12 volt size. I done away with the battery isolator changed all cable to "00" & located engine earth to the clam shell as specified. What a difference it cranks over like my old race car of 12 Volt into 6 Volt. Next I will be installing a battery isolator on the earth side. Hopefully this will be the end of my starting issues. Kpar |
01-27-2019, 08:06 AM | #2 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: 6 Volt Erath Issue
Sponsored Links (Register now to hide all advertisements)
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 01-27-2019 at 08:13 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|