|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-03-2018, 07:50 PM | #1 |
Senior Member
Join Date: Dec 2010
Location: Gold Coast , Australia
Posts: 249
|
94 carb -Accelerator pump
Hi Fellas,
I am rebuilding a spare 94 carb and have two new accelerator pump plungers BUT they are different lengths. There appears to be around 3/16 inch difference in travel when I install them. So knowing that these carbs have to be accurately assembled, which would be the correct plunger? Any help would be appreciated thanks Dave |
02-03-2018, 08:40 PM | #2 |
Senior Member
Join Date: May 2010
Location: North Dakota
Posts: 1,618
|
Re: 94 carb -Accelerator pump
Ithe long one is correct. I would opt for a leather plunger.
__________________
I dig coal, which provides motivation for EVs. |
Sponsored Links (Register now to hide all advertisements) |
|
02-03-2018, 10:43 PM | #3 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Re: 94 carb -Accelerator pump
35,
The short one is for Holley tea pot carbs.....go long. On otherwise good 94's with not so perfect acc pump bores the viton....orange or blue in color....has been a very good performer. Charlie ny |
02-04-2018, 06:02 PM | #4 |
Senior Member
Join Date: Dec 2010
Location: Gold Coast , Australia
Posts: 249
|
Re: 94 carb -Accelerator pump
Sponsored Links (Register now to hide all advertisements)
Dave |
|
|
Sponsored Links (Register now to hide all advertisements) |
|