|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-19-2013, 05:38 PM | #1 |
Senior Member
Join Date: Nov 2011
Location: whitehall pa.
Posts: 439
|
am i missing something?
my stricker plates were shot on my '31 coupe. I got the new ones from Snyders, and they're adjusted all the way towards the door, or outside of the car. the door latch only catchs if I SLAM the door and when I drive I pops to the first latch. is there something missing? its the grooved door post + the grooved stricker plate. if I have it on the right way, I can't see why or how they have adjustment to go back towards the inside of the car, the door latch will never even touch the stricker plate.
|
10-19-2013, 08:15 PM | #2 |
Senior Member
Join Date: Nov 2011
Location: whitehall pa.
Posts: 439
|
Re: am i missing something?
30 coupe' could you give me , or can anyone give me the measurement of the front of the striker plate where the latch holds to. the height of it. i'm thinking it is not tall enough for the latch to hold. its not the same height of the first hold. its lower.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-20-2013, 09:07 AM | #3 |
Senior Member
Join Date: Nov 2011
Location: whitehall pa.
Posts: 439
|
Re: am i missing something?
the strikes are 9/16". but the latchs are pretty sloppy. so i'l order them Monday. thanks 30 coupe.
|
10-20-2013, 02:01 PM | #4 |
Senior Member
Join Date: Nov 2011
Location: whitehall pa.
Posts: 439
|
Re: am i missing something?
just wondering if I can change-out the door latch on my '31 without taking off the panel? if I remove the 4 screws, wonder if I can disconnect the arm for the latch release, and just swap it out without removing the panel?
|
10-20-2013, 03:11 PM | #5 | |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: am i missing something?
Quote:
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
|
10-20-2013, 03:25 PM | #6 |
Senior Member
Join Date: Nov 2011
Location: whitehall pa.
Posts: 439
|
Re: am i missing something?
Sponsored Links (Register now to hide all advertisements)
|
10-20-2013, 04:25 PM | #7 |
Senior Member
Join Date: Nov 2011
Location: whitehall pa.
Posts: 439
|
Re: am i missing something?
I was going to buy the complete latch ass. I think it has everything on it. I looked on Snyders and there like $25 each. or am I mistaking there not complete.
|
10-20-2013, 04:32 PM | #8 |
Senior Member
Join Date: Nov 2011
Location: whitehall pa.
Posts: 439
|
Re: am i missing something?
ok I understand. thanks for that tip 30 coupe.
|
10-20-2013, 05:09 PM | #9 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: am i missing something?
Shims under the striker may help.
|
10-20-2013, 05:20 PM | #10 |
Senior Member
Join Date: Nov 2011
Location: whitehall pa.
Posts: 439
|
Re: am i missing something?
Purdy, I was going to do that. but then when I looked at the latch, everything was sloppy on it. and the main spring is weak.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|