|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Jul 2014
Location: orrington, maine
Posts: 76
|
![]()
I am wondering if I can replace my TT differential with a regular T differential? I'm not hauling any load but would like more road speed. Any ideas?
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 5,451
|
![]()
No. Different mounting, different wheel base, different springs and spring mounts. Couple of choices; spend between 1000 and 2000 for the high speed ring gears or get an add on aftermarket transmission with overdrive.
__________________
I know the voices aren't real but damn they have some good ideas! ![]() |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Member
Join Date: Apr 2018
Posts: 48
|
![]()
Most TT's come from the factory with 7:1 rear. That equals 17 mph.
5:1 gears will give an easy 25 mph, and if you run high rpm will give you 35. 5:1 gears are scarce and relatively expensive. But you need either 5:1 gears or an auxiliary transmission with over drive to run a TT at over 17 mph as recommended by Ford if you have 7:1 gears. I have a set of used, but serviceable 5:1 gears for a TT. Let me know via pm if you are interested... |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2014
Posts: 102
|
![]()
I think a regular T rear axle would be too light. However I have seen two TT trucks with Model A car axles, one with a later V8 axle, and one with a modern Ford (maybe Explorer) axle. You have to do your own fabrication for spring and radius arm location.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 12,283
|
![]()
Here is a link to the Warford over-under gearbox:
http://www.mtfca.com/discus/messages...tml?1440509219 There were others including the Tiger gearbox that bolted to the rear axle input and the Ruxtell 2-speed rear axle. While none of them are common in this day and age, there are likely still repairable examples of these units still out there. |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Jun 2011
Location: Noxon, MT
Posts: 66
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|