|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-01-2021, 06:56 AM | #1 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Master Cylinder bracket- 39 Pickup
I tore my truck down to the frame last night. The Master Cylinder bracket is busted off.
Does anyone know of a source for a replacement? Someone with a junk frame, or upgraded brakes? I know I can fab one, but would rather just find a replacement. Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 08:07 AM | #2 |
Senior Member
Join Date: May 2010
Location: Middletown Pa
Posts: 392
|
Re: Master Cylinder bracket- 39 Pickup
The master cylinder bracket is part of the brake and clutch. Those are not that hard to find. Should be some in the swap section or ebay.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-01-2021, 08:39 AM | #3 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Re: Master Cylinder bracket- 39 Pickup
Not on my truck. It is riveted to the frame.
Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 09:09 AM | #4 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,834
|
Re: Master Cylinder bracket- 39 Pickup
|
11-01-2021, 09:37 AM | #5 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Re: Master Cylinder bracket- 39 Pickup
Brake and clutch pivot Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 09:38 AM | #6 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Re: Master Cylinder bracket- 39 Pickup
Sponsored Links (Register now to hide all advertisements)
What’s left of the bracket. You can see the Clevis for the plunger rod. Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 09:42 AM | #7 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Re: Master Cylinder bracket- 39 Pickup
Better pic of lever and bracket remnants. Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 09:44 AM | #8 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Re: Master Cylinder bracket- 39 Pickup
I may have just answered my own question. I see that support has two holes in it. I’m guessing someone used that for the master?
Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 09:48 AM | #9 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Re: Master Cylinder bracket- 39 Pickup
I am wondering if this is a 38 frame with a home brewed hydraulic setup.
Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 11:51 AM | #10 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,766
|
Re: Master Cylinder bracket- 39 Pickup
^^ Yes, it looks like that is the case. The frame and pedals are pre-hydraulic. It might be easier to find a 39 pedal assembly. If you can't find an original one they are available new repro.
Mart. |
11-01-2021, 12:02 PM | #11 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Re: Master Cylinder bracket- 39 Pickup
I just purchased what I hope is an original.
Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 12:57 PM | #12 |
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 1,166
|
Re: Master Cylinder bracket- 39 Pickup
If you have a '39 commercial car frame (1/2T) the '39 pedal assembly should fit right in. If its a '38 frame there are modifications that need to be done. Look for the vin number on the top of the frame, drivers side, about 12" forward of the firewall and that will tell you what you have.
|
11-01-2021, 01:25 PM | #13 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Re: Master Cylinder bracket- 39 Pickup
Thanks Bill
Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 01:44 PM | #14 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,120
|
Re: Master Cylinder bracket- 39 Pickup
Quote:
This is an original '39 set of pedals. The bracket AND EACH pedal will have a "91A-" prefix in the number on each piece of '39 pedals. DD Disassembled |
|
11-01-2021, 02:08 PM | #15 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Re: Master Cylinder bracket- 39 Pickup
It’s a 38 frame. 39 body. 39 juice brakes on the axles.
What will I need to modify to adapt to 39 pedals? Cut the frame? Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 03:06 PM | #16 |
Senior Member
Join Date: Jun 2011
Location: Altadena, CA
Posts: 127
|
Re: Master Cylinder bracket- 39 Pickup
Don't know if these will help or not but here they are just in case...
|
11-01-2021, 03:09 PM | #17 |
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 1,166
|
Re: Master Cylinder bracket- 39 Pickup
You will need to enlarge the hole that the clutch/brake shaft goes through now. Below is a template that should help. You will find that the '39 clutch pedal will hit the '38 frame when fully depressed. The '39 frame has a dimple where the clutch arm contacts the frame. You should heat and form one similar so the clutch pedal has full travel. The clutch arm on the transmission will need to be able to reach the pedal linkage that is now farther to the left. There are some offset arms available but I just made up a new longer shaft and used the stock arm. Of course you will need to install a hydraulic brake light switch.
My '39 pedals lined up perfectly with the metal floorboard. Last edited by 38bill; 11-01-2021 at 10:58 PM. |
11-01-2021, 03:13 PM | #18 |
Senior Member
Join Date: Apr 2014
Location: Minnesota
Posts: 1,166
|
Re: Master Cylinder bracket- 39 Pickup
Here is what mine look like installed.
'38 frame/ '39 pedals |
11-01-2021, 03:57 PM | #19 |
Senior Member
Join Date: Aug 2021
Location: Flat Rock, Michigan
Posts: 140
|
Re: Master Cylinder bracket- 39 Pickup
You guys are the best! I really appreciate it.
I’m not new to building cars/machines/tractors etc. Just new to flatheads- I wound up with the 39 pickup, a 50 shoebox, and a 49 parts car within the last year. Sent from my iPhone using Tapatalk
__________________
29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird |
11-01-2021, 05:15 PM | #20 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,120
|
Re: Master Cylinder bracket- 39 Pickup
.
It sort of looks like you have a pedal assembly already installed, WITH a master cylinder MOUNTED. A '39 assembly would almost surely bolt-in once you remove what is there. Clutch linkage looks just like '39. I see what looks like a '38 "CABLE BRAKE" sheath indicating that truck likely is a '38, and NOT '39. Is the serial number stamped on the frame rail LOWER than 18-4,661,001? DD . |
|
|
Sponsored Links (Register now to hide all advertisements) |
|