The Ford Barn

edscoupe · 04-27-2011, 02:58 PM

I am looking for a choke cable to fit 226 6cyl with 7HA carb. it is a H motor in a 1948 ford coupe, do you have any thing usable. Ed

ken ct · 04-27-2011, 07:28 PM

I have the carb bracket for the cable. But no cable. ken ct pm

edscoupe · 04-27-2011, 11:13 PM

I did not know there was a bracket, some one put in a aftermarket cable that does'nt work very well, the bracket is a start what do you need for it. thanks Ed

ken ct · 04-28-2011, 07:46 AM

If you cant PM me send email to [email protected] ken ct.

edscoupe · 05-01-2011, 09:01 PM

bttt

ken ct · 05-04-2011, 10:36 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by edscoupe

I did not know there was a bracket, some one put in a aftermarket cable that does'nt work very well, the bracket is a start what do you need for it. thanks Ed

Bracket is in the mail. ken ct.

edscoupe · 05-09-2011, 03:36 PM

I recieved bracket sat 5-8-11 thanks Ed

edscoupe · 05-09-2011, 03:37 PM

Bttt

edscoupe · 05-16-2011, 04:29 PM

Bttt

ken ct · 05-17-2011, 01:38 AM

You would be better off useing a full rod type connection from firewall to carb choke lever 10 1/4" rod which are availible from any vendor instead of trying to find one of those 1/2 rod and 1/2 cable deals you keep looking for.Their verrry hard to find one thats even workable. ken ct. OMO

edscoupe · 05-21-2011, 10:34 AM

I did find a throttle cable that i can shorten and replace knobe to make in to choke cable, but i would rather find the correct cable, they are out there, people are taking the 6 out and putting in flathead 8's or worse yet putting in chevy motors and the cable is of no use to them. I have to believe that some one out there has one i just have not found him yet. ( the cable does't have a rod it is all cable from knob to the end that hooks to choke lever)

edscoupe · 05-21-2011, 10:35 AM

bttt

04-27-2011, 02:58 PM	#1
edscoupe Member Join Date: May 2010 Location: Eagan Mn Posts: 33	choke cable City: Eagan State: Mn I am looking for a choke cable to fit 226 6cyl with 7HA carb. it is a H motor in a 1948 ford coupe, do you have any thing usable. Ed

04-27-2011, 07:28 PM	#2
ken ct BANNED Join Date: May 2010 Location: stratford,ct Posts: 5,971	Re: choke cable I have the carb bracket for the cable. But no cable. ken ct pm

04-27-2011, 11:13 PM	#3
edscoupe Member Join Date: May 2010 Location: Eagan Mn Posts: 33	Re: choke cable I did not know there was a bracket, some one put in a aftermarket cable that does'nt work very well, the bracket is a start what do you need for it. thanks Ed

04-28-2011, 07:46 AM	#4
ken ct BANNED Join Date: May 2010 Location: stratford,ct Posts: 5,971	Re: choke cable If you cant PM me send email to [email protected] ken ct.

05-01-2011, 09:01 PM	#5
edscoupe Member Join Date: May 2010 Location: Eagan Mn Posts: 33	Re: choke cable bttt

05-09-2011, 03:36 PM	#7
edscoupe Member Join Date: May 2010 Location: Eagan Mn Posts: 33	Re: choke cable I recieved bracket sat 5-8-11 thanks Ed

05-09-2011, 03:37 PM	#8
edscoupe Member Join Date: May 2010 Location: Eagan Mn Posts: 33	Re: choke cable Bttt

05-16-2011, 04:29 PM	#9
edscoupe Member Join Date: May 2010 Location: Eagan Mn Posts: 33	Re: choke cable Bttt

05-17-2011, 01:38 AM	#10
ken ct BANNED Join Date: May 2010 Location: stratford,ct Posts: 5,971	Re: choke cable You would be better off useing a full rod type connection from firewall to carb choke lever 10 1/4" rod which are availible from any vendor instead of trying to find one of those 1/2 rod and 1/2 cable deals you keep looking for.Their verrry hard to find one thats even workable. ken ct. OMO

05-21-2011, 10:34 AM	#11
edscoupe Member Join Date: May 2010 Location: Eagan Mn Posts: 33	Re: choke cable I did find a throttle cable that i can shorten and replace knobe to make in to choke cable, but i would rather find the correct cable, they are out there, people are taking the 6 out and putting in flathead 8's or worse yet putting in chevy motors and the cable is of no use to them. I have to believe that some one out there has one i just have not found him yet. ( the cable does't have a rod it is all cable from knob to the end that hooks to choke lever)

05-21-2011, 10:35 AM	#12
edscoupe Member Join Date: May 2010 Location: Eagan Mn Posts: 33	Re: choke cable bttt