neutral safety switch

[paul2748]

Before cutting anything, check out the connections on both. Maybe easier than you think.

Originally Posted by zuburg

Yes, that's another reason I'm making the change, much more room to work. The car originally was equipped with a manual transmission so I think the PO did some "custom" work to install the original switch. The wires are all taped up and there is not much slack to work with. I think I will cut the wires near the old switch and splice to the wires on the new switch and hope for the best. I'm guessing the original wires do not have any connectors like the new switch has, so they won't do me any good anyway.