Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-16-2014, 09:57 PM   #1
Ian Curtis
Senior Member
 
Ian Curtis's Avatar
 
Join Date: Jul 2014
Location: Snohomish, WA
Posts: 100
Default Axial Play in Water Pump Shaft

Hi All,

This previous weekend I went in a 130 mile round trip journey, which is far & away the most I've driven my truck. Made it to the destination & back with no issues, but when I parked the truck there was a serious drip out of the packing nut. It's always dripped a little, so I squeezed in some grease and tightened it a bit and walked away, but a half hour later there was a sizeable puddle on the floor with maybe a drip per second coming from the block. I eventually discovered that if I pushed "in" (towards the block) the shaft moved between a 1/16 and an 1/8 of an inch & the leak stopped.

Is this a sign of something more serious, or do I need to just tighten the packing nut until it stops dripping or replace the packing?
Ian Curtis is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:54 PM.