The Ford Barn

Farrell In Vancouver · 09-08-2011, 05:06 PM

Can anyone on this forum confirm what this express bed should be bolted to? Sorry for the small picture I can get better ones later.

Layden B · 09-08-2011, 05:28 PM

Looks to me that it is right where it was intended, on a Model TT truck chassis.

Thomas T · 09-08-2011, 05:58 PM

Looking at your photo and judging from the length it appears to be for the TT

Farrell In Vancouver · 09-09-2011, 08:20 AM

Thanks gents, oh Layden, thats a 1930-31 AA Frame with the high speed rear end.
Thomas, sharp eyes and that is what I was afraid of. Any body looking for a cherry express box?

Willie in Houston · 09-09-2011, 09:12 AM

Farrell, Ford made special fenders that bolted to the side of the express bed. They may be hard to find but I guess they could be fabricated as they are fairly simple.

Thomas T · 09-10-2011, 06:21 AM

Sponsored Links (Register now to hide all advertisements)

I sure would like to have that Express Bed for the truck that I am building, but freight cost down here to Texas would most likely be to much.

09-08-2011, 05:28 PM	#2
Layden B Senior Member Join Date: May 2010 Posts: 300	Re: Express Bed Identification Looks to me that it is right where it was intended, on a Model TT truck chassis.

09-08-2011, 05:58 PM	#3
Thomas T Senior Member Join Date: Jul 2011 Location: Etoile, Texas Posts: 146	Re: Express Bed Identification Looking at your photo and judging from the length it appears to be for the TT __________________ Thomas T https://www.youtube.com/channel/UCNW...KLTO3gGfzbGvZw

09-09-2011, 08:20 AM	#4
Farrell In Vancouver Senior Member Join Date: May 2010 Location: Pitt Meadows BC Posts: 1,003	Re: Express Bed Identification Thanks gents, oh Layden, thats a 1930-31 AA Frame with the high speed rear end. Thomas, sharp eyes and that is what I was afraid of. Any body looking for a cherry express box?

09-09-2011, 09:12 AM	#5
Willie in Houston Senior Member Join Date: May 2010 Posts: 252	Re: Express Bed Identification Farrell, Ford made special fenders that bolted to the side of the express bed. They may be hard to find but I guess they could be fabricated as they are fairly simple.

09-10-2011, 06:21 AM	#6
Thomas T Senior Member Join Date: Jul 2011 Location: Etoile, Texas Posts: 146	Re: Express Bed Identification Sponsored Links (Register now to hide all advertisements) I sure would like to have that Express Bed for the truck that I am building, but freight cost down here to Texas would most likely be to much. __________________ Thomas T https://www.youtube.com/channel/UCNW...KLTO3gGfzbGvZw

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode