The Ford Barn

mngreen · 07-07-2010, 01:16 PM

Hello:

Does anyone have a wiring diagram for a GM Delco-remy alternator setup with a voltage regulator separately mounted on the firewall? I have a 12V negative ground setup.

There are two wires coming from the three connector pins (one unused) on the alternator and another wire connected to the + pole of the alternator.

I am also looking to install an amp meter where appropriate in the circuit.

Thanks,

Mike Green

Mike V. Florida · 07-08-2010, 11:57 PM

Sponsored Links (Register now to hide all advertisements)

Don't know if this will help or not;

07-07-2010, 01:16 PM	#1
mngreen Senior Member Join Date: Jul 2010 Location: Rancho Santa Margarita, CA Posts: 155	Wiring diagram for alternator/VR setup Hello: Does anyone have a wiring diagram for a GM Delco-remy alternator setup with a voltage regulator separately mounted on the firewall? I have a 12V negative ground setup. There are two wires coming from the three connector pins (one unused) on the alternator and another wire connected to the + pole of the alternator. I am also looking to install an amp meter where appropriate in the circuit. Thanks, Mike Green

07-08-2010, 11:57 PM	#2
Mike V. Florida Senior Member Join Date: May 2010 Location: South Florida Posts: 14,054	Re: Wiring diagram for alternator/VR setup Sponsored Links (Register now to hide all advertisements) Don't know if this will help or not; __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II