The Ford Barn

Graham Freeman · 03-14-2021, 05:58 PM

I am having trouble sourcing the correct brass nuts for fixing the vacumn lines into the manifold for a 1934 here in New Zealand.
These are the small ones 3/8".
I understand there are 3 sizes covering the years 1932/48 but I need the small ones.
Any ideas? I need 3 in total.
Thanks
Graham

koates · 03-14-2021, 08:42 PM

Graham, Third Generation Auto (USA) has them. You can also buy the complete vacuum pipe with fittings pre-bent from them pretty cheap. The shipping would add to the cost of course. Michael has them listed on his ebay site. Regards, Kevin.

Graham Freeman · 03-15-2021, 02:10 AM

Thanks Kevin, I knew I had seen them listed somewhere but could not remember where.
Will contact him.
Graham

petehoovie · 03-15-2021, 02:33 AM

See > https://thirdgenauto.com/product/193...and-11a-12226/

Mart · 03-15-2021, 08:19 AM

Sponsored Links (Register now to hide all advertisements)

Check the link. You need the ones for 3/16" pipe with the 3/8-24 threads.

https://www.rockauto.com/en/tools/ho...sleeve+nut,247

The ones I have seen have 7/16" heads.

You can search for EDELMANN 111300

Mart.

03-14-2021, 05:58 PM	#1
Graham Freeman Senior Member Join Date: May 2010 Location: New Zealand Posts: 298	33/34 vacumn line/manifold nuts supply. I am having trouble sourcing the correct brass nuts for fixing the vacumn lines into the manifold for a 1934 here in New Zealand. These are the small ones 3/8". I understand there are 3 sizes covering the years 1932/48 but I need the small ones. Any ideas? I need 3 in total. Thanks Graham

03-14-2021, 08:42 PM	#2
koates Senior Member Join Date: May 2010 Location: Melbourne Australia. Posts: 2,079	Re: 33/34 vacumn line/manifold nuts supply. Graham, Third Generation Auto (USA) has them. You can also buy the complete vacuum pipe with fittings pre-bent from them pretty cheap. The shipping would add to the cost of course. Michael has them listed on his ebay site. Regards, Kevin.

03-15-2021, 02:10 AM	#3
Graham Freeman Senior Member Join Date: May 2010 Location: New Zealand Posts: 298	Re: 33/34 vacumn line/manifold nuts supply. Thanks Kevin, I knew I had seen them listed somewhere but could not remember where. Will contact him. Graham

03-15-2021, 02:33 AM	#4
petehoovie Senior Member Join Date: May 2015 Posts: 8,119	Re: 33/34 vacumn line/manifold nuts supply. See > https://thirdgenauto.com/product/193...and-11a-12226/ __________________ The only thing nice about being imperfect is the joy it brings to others.... *"Silver rings, your butt! Them's washers!"* "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0

03-15-2021, 08:19 AM	#5
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,749	Re: 33/34 vacumn line/manifold nuts supply. Sponsored Links (Register now to hide all advertisements) Check the link. You need the ones for 3/16" pipe with the 3/8-24 threads. https://www.rockauto.com/en/tools/ho...sleeve+nut,247 The ones I have seen have 7/16" heads. You can search for EDELMANN 111300 Mart.