|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-13-2016, 03:28 PM | #1 |
Senior Member
Join Date: Sep 2014
Location: Maine
Posts: 325
|
35 pickup door window
Sponsored Links (Register now to hide all advertisements)
In the picture are the parts to one door from the channel kit. I have the top piece and the two pieces on the left hand side figured out but I am struggling with where the other four pieces go in the door channel. The three pieces on the right are flat about 1/2" wide with a fuzz edge that would appear to go against the door glass. The 4th piece from the right is a channel approx. 10" long and1/2" deep. If anyone has knowledge or experience putting this kit in and can share I'd be grateful. Thanks
__________________
Lineman, the only dumb animal that can harness himself !! |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|