12-19-2016, 10:38 AM | #1 |
Junior Member
Join Date: May 2010
Posts: 25
|
gas tank
after having tank cleaned and boiled out is it a good idea to have the tank coated yes or no
|
12-19-2016, 10:46 AM | #2 |
Senior Member
Join Date: May 2010
Location: Newington, Connecticut
Posts: 1,374
|
Re: gas tank
I vote no, as I did that and had it coated and it "cured" for a month, and ever since I have cherry red gas! I have a brand new tank that will go in after I heal enough to work on the truck. I should have bought a new tank 6 years ago. Never do that again!!
__________________
Barry 50 F-1 |
Sponsored Links (Register now to hide all advertisements) |
|
12-19-2016, 11:09 AM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,440
|
Re: gas tank
This is a point of contention among a lot of us old car lovers. It's a sort of damned if you do and damned if you don't thing. The OEM fuel tanks were what is referred to as "terne coated" which was a term related to a hot dip in molten tin/lead. This kept them from rusting quickly which there in lies the problem. A freshly de-rusted tank really needs to have some kind of coating or it will corrode right back up rather quickly. No one does terne coating that I'm aware of due to the lead. Zinc coating maybe if you have a local shop that galvanizes stuff. Bill Hirsch and others sell a fuel resistant coating that will give corrosion protection for an unknown period of time before it too starts to degrade and plug fuel filters. A person has to use something though or your filters will start plugging with rust particles pretty quick.
I would use the Bill Hirsch stuff my self at least as long as it will last and then replace the tank when it cruds back up as long as someone makes an acceptable replacement tank. Nothing lasts forever no mater how much a person would like it to. |
12-19-2016, 11:23 AM | #4 |
Senior Member
Join Date: Apr 2011
Location: Northern New Jersey
Posts: 370
|
Re: gas tank
Coated mine no problems in 10 yrs. Constantly looking inside for degradation of coating and finding nothing so far. I bought mine from Eastwood and followed each step. It was a day and a half process with of course time in between. Very happy with the results.
__________________
Assumption is the mother of all foul-ups. Last edited by stangblue; 12-19-2016 at 11:29 AM. |
12-19-2016, 01:52 PM | #5 |
Senior Member
Join Date: Nov 2011
Location: NW Arkansas
Posts: 524
|
Re: gas tank
I had to replace some of the metal that has rusted through on the bottom of the tank. When I was finished I coated it with KREEM (from J. C. Whitney) to be sure any pin holes were sealed. Did this in 1985 and it is still going strong. Did my Harley tank 5 years ago with the same results. I did do the unthinkable, though. I followed the instructions to the letter.
|
12-20-2016, 10:31 PM | #6 |
Senior Member
Join Date: May 2013
Location: Pa.
Posts: 2,174
|
Re: gas tank
Sponsored Links (Register now to hide all advertisements)
__________________
Nomad |
12-21-2016, 09:38 AM | #7 |
Senior Member
|
Re: gas tank
Do you think the alcohol has any thing to do with it 10% or more?
|
12-21-2016, 03:48 PM | #8 |
Senior Member
Join Date: Nov 2011
Location: NW Arkansas
Posts: 524
|
Re: gas tank
Been using 10% for a few years with no bad effects.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|