34 Windshield regulator screws

[Terry,OH]

What is the size of the two screws that hold the regulator to the bottom of the windshield frame on the 34 ??
From the countersink on the regulator they may be #10. Can someone confirm the size, thread and length and weather the head is flat or oval countersink. Thank You in advance.

[Mart]

From memory they are 1/4" UNC with a high dome round head, slotted. (mine's a 33).

95% sure, can anyone concur/correct?

Mart.

[Terry,OH]

There are (2) 1/4-20 screws that mount the regulator to the area under the dash, I need the (2) screws that hold the regulator to the bottom of the W/S frame. In this area 1/4-20 is way too big, the regulator has a plate at the end of the two arms, this plate has two countersunk holes for the two screws to hold the plate to the windshield frame. The W/S frame has two holes for the screws, In my case the W/S frame threads are messed up. I would like to repair them back to the original size and use the proper screws to mount the regulator.

[Mart]

I think you are right, sorry I misunderstood.

10-unf countersunk slotted raised head screws.

I failed to get mine out so I am just going by instinct based on all the other screws in the windshield frame being this thread.

Mart.

[Ken Arms]

Sponsored Links (Register now to hide all advertisements)

Try Roy Nacewicz, he has lots of correct hardware for flatheads. Nice guy, if you dont see it in catalogue call him. Ken