Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-07-2016, 05:22 PM   #1
MVal
Member
 
Join Date: May 2010
Posts: 66
Default Replacing generator field windings

My 30-31 generator recently overheated (250+ deg) and the field pole insulation is scorched and mostly missing so am considering replacing both field poles and anything else to put it back into usable condition. But before I spend money on the field windings etc. and get involved in the project wanted to know if anyone has some experience in removing the screws holding the poles in place as they look pretty securely in place. Have considered using a rachet with a screwdriver attachment in a drill press but thought maybe someone had a better idea and more experience.
MVal is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:33 AM.