Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-11-2021, 02:14 PM   #1
Model51
Member
 
Model51's Avatar
 
Join Date: May 2010
Location: Fairfax Station, VA
Posts: 46
Default Bullet Wire Connector Help

I'm looking for a source to purchase the bullet wire connector which splits the tail light wire and brake light wire when adding the optional right-hand tail lamp assembly in a Truck (not a commercial car pickup). The wiring harnesses for truck tail lights are different than those used for a car as Trucks typically came only with a single left-hand rear tail light assembly.

I can find the B-14467 wire connector sleeve for connecting two single wires and a double connector which is essentially two of these put together and connected electrically. While the double connector will work, it leaves one open hole and just doesn't seem right. I can't find a Ford part number in any Chassis book I have nor can I find a vendor source. I thought for sure I saw them for sale once, but age and imagination seem to increase every day, so maybe I'm just dreaming.

Any suggestions for a source of the 1-2 bullet connector, or a verified Ford Part Number, will be greatly appreciated.
Model51 is offline   Reply With Quote
Old 01-11-2021, 02:26 PM   #2
Zeke3
Senior Member
 
Zeke3's Avatar
 
Join Date: Dec 2014
Location: Columbus, IN
Posts: 622
Default Re: Bullet Wire Connector Help

You should contact Fred at Southside Obsolete, barnfind08 on here, or Michael at Third Gen Automotive. If neither of those two can help, then contact Rhode Island Wiring to see if they can help with what you are looking for.
Zeke3 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-11-2021, 02:26 PM   #3
FortyNiner
Senior Member
 
FortyNiner's Avatar
 
Join Date: May 2012
Location: u-rah-rah-Wisconsin
Posts: 925
Default Re: Bullet Wire Connector Help

Rhode Island Wire carries those connectors.
http://www.riwire.com/
__________________
19 and 49 F1 - jes' like Henry II built
1946 Deluxe - as Henry built it
FortyNiner is offline   Reply With Quote
Old 01-11-2021, 03:18 PM   #4
Model51
Member
 
Model51's Avatar
 
Join Date: May 2010
Location: Fairfax Station, VA
Posts: 46
Default Re: Bullet Wire Connector Help

Sponsored Links (Register now to hide all advertisements)
Thank you both for your suggestions. I'll follow up with those folks.
Model51 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:24 PM.