Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-29-2020, 11:06 AM   #1
Oldgearz
Senior Member
 
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 359
Default About spark plug gap

Just got my first Model A and am enjoying working on it. I ordered new spark plugs (W-18) and set the gap at .035". This got me wondering about spark plug gap. I am very experienced (shade tree style) at working on my five Ford 8N tractors (1947-1951), and have changed many plugs in them They have the Ford 4 cylinder engine and their plug gap is .025-.028, quite smaller than the A's .035. For those of you who understand Ford 4 cylinder engines better than me, why would there be such a large difference in plug gap for the A. All the W-18s came with a gap of about .025. Why the difference in gap needs? The tractors are also 6V positive ground.
Oldgearz is offline   Reply With Quote
Old 11-29-2020, 11:16 AM   #2
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
Default Re: About spark plug gap

Its all about available voltage. The old tractors should be able to handle the wider gap. And I think Ford was still trying to figure things out back then.

A wider gap allows for better/smoother low speed operation, but, is more susceptible to high speed missfire.
Patrick L. is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-29-2020, 11:42 AM   #3
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 3,429
Default Re: About spark plug gap

The spark plug gap is set on the basis of:
> The amount of hi-voltage available to jump the gaps in the distributor & spark plugs;

> Volumetric efficiency of the engine's intake system;
> Compression ratio;
> Combustion flame development in the cylinders;

> Density of the fuel in the cylinders;
> Power the engine makes.

A rule of thumb is that the more power an engine makes, the smaller the smaller the total gap needs to be (rotor to distributor + spark [plug gap).
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote
Old 11-29-2020, 12:12 PM   #4
The Master Cylinder
Senior Member
 
The Master Cylinder's Avatar
 
Join Date: Aug 2012
Posts: 875
Default Re: About spark plug gap

Quote:
Originally Posted by Bob Bidonde View Post
The spark plug gap is set on the basis of:
> The amount of hi-voltage available to jump the gaps in the distributor & spark plugs;

> Volumetric efficiency of the engine's intake system;
> Compression ratio;
> Combustion flame development in the cylinders;

> Density of the fuel in the cylinders;
> Power the engine makes.

A rule of thumb is that the more power an engine makes, the smaller the smaller the total gap needs to be (rotor to distributor + spark [plug gap).
In laymen's terms, The Model A engine is an inefficient design that needs a big spark to light the fire.
__________________
The Master Cylinder

Enjoying life at the beach in SoCal...
The Master Cylinder is offline   Reply With Quote
Old 11-29-2020, 12:22 PM   #5
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,339
Default Re: About spark plug gap

The gap maybe larger then you think. Add in the .025 at the distributor and makes it about the same as my S10 4 cylinder, around .060.
__________________
I know the voices aren't real but damn they have some good ideas!
redmodelt is offline   Reply With Quote
Old 11-29-2020, 01:56 PM   #6
Oldgearz
Senior Member
 
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 359
Default Re: About spark plug gap

Sponsored Links (Register now to hide all advertisements)
Bob's answer is the tech talk I need to understand. I knew somebody out there would have the info. Thanks to you all for helping the rest of us nubies learn.
Oldgearz is offline   Reply With Quote
Old 11-29-2020, 03:26 PM   #7
40 Deluxe
Senior Member
 
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,774
Default Re: About spark plug gap

Quote:
Originally Posted by redmodelt View Post
The gap maybe larger then you think. Add in the .025 at the distributor and makes it about the same as my S10 4 cylinder, around .060.

Well, not really. It's the larger gap that determines the voltage needed to fire the plug. The larger the gap (and the higher the compression pressure), the more voltage required. So the spark jumps that .025" rotor gap like it wasn't even there. Thus all the coil sees is the .035" plug gap.
40 Deluxe is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:28 AM.