|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-05-2015, 03:09 PM | #1 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
5 main, chev, crankModel A engine
I know this is not for ever one, so don't look if you do not want to see a chev crank in a, A engine.
After a couple of years I'm back working on this engine. Today I started to make rods for this engine out of 7075 Alum. I made a wooden one first to make sure my math was right. If there is any interest I can post some pictures of making the rods along the way. This engine will be for my home built over head cylinder head. |
10-05-2015, 03:21 PM | #2 |
Senior Member
Join Date: Aug 2010
Location: Phoenix AZ/Bath UK
Posts: 481
|
Re: 5 main, chev, crankModel A engine
Interest here
Pics please Mr Miller |
Sponsored Links (Register now to hide all advertisements) |
|
10-05-2015, 03:24 PM | #3 | |
Senior Member
Join Date: May 2010
Location: 60615,330th Ave.,Clare, Iowa, 50524
Posts: 1,457
|
Re: 5 main, chev, crankModel A engine
Quote:
Herm. |
|
10-05-2015, 03:29 PM | #4 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: 5 main, chev, crankModel A engine
Ok I will take them after each operation. Also I will be using 283 Chev pistons.
|
10-05-2015, 03:30 PM | #5 |
Senior Member
Join Date: Jan 2011
Location: west bend wi
Posts: 314
|
Re: 5 main, chev, crankModel A engine
George, Whittle away and lots of pictures please! Gary
__________________
I am usually relatively happy------Gary |
10-05-2015, 04:08 PM | #6 |
Member
Join Date: May 2013
Location: Ontario, Canada
Posts: 81
|
Re: 5 main, chev, crankModel A engine
Sponsored Links (Register now to hide all advertisements)
|
10-05-2015, 04:09 PM | #7 |
Senior Member
Join Date: May 2010
Location: Colorado
Posts: 235
|
Re: 5 main, chev, crankModel A engine
I'm watching, interesting
|
10-05-2015, 04:11 PM | #8 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: 5 main, chev, crankModel A engine
Day one. The picture of putting in wrist pin holes. Also the wooden rod that I made to make sure my math was right. Also to make sure it cleared every thing in side the engine. The alum rods will be a little different in shape.
|
10-05-2015, 04:16 PM | #9 |
Senior Member
Join Date: May 2010
Location: NE Illinois
Posts: 499
|
Re: 5 main, chev, crankModel A engine
Please keep the pics coming. Are you building a racing motor for the salt flats???
|
10-05-2015, 04:25 PM | #10 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: 5 main, chev, crankModel A engine
|
10-05-2015, 04:27 PM | #11 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: 5 main, chev, crankModel A engine
|
10-05-2015, 04:58 PM | #12 |
Junior Member
Join Date: May 2010
Location: Clinton, Tennessee
Posts: 11
|
Re: 5 main, chev, crankModel A engine
Thanks for this post Mr. Miller. How about some specs on the crankshaft. Been trying for some time to find one like this. Never thought to look at chev as the source.
|
10-05-2015, 05:21 PM | #13 |
Senior Member
Join Date: Jun 2011
Location: Upstate South Carolina
Posts: 794
|
Re: 5 main, chev, crankModel A engine
NIce! Never seen anybody whittle a rod out of barstock. Good Luck
|
10-05-2015, 05:41 PM | #14 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
Re: 5 main, chev, crankModel A engine
Im most curious how you handled the cam lobe timing.
|
10-05-2015, 06:04 PM | #15 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: 5 main, chev, crankModel A engine
|
10-05-2015, 06:14 PM | #16 |
Member
Join Date: May 2010
Location: St. Paul, MN
Posts: 45
|
Re: 5 main, chev, crankModel A engine
|
10-05-2015, 06:51 PM | #17 |
Senior Member
Join Date: Jan 2011
Location: Central Me.
Posts: 260
|
Re: 5 main, chev, crankModel A engine
It looks like the center lines of #2 and #3 journals may be offset from the bores? I'm curious how you will handle that. Ron W
|
10-05-2015, 06:58 PM | #18 | |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: 5 main, chev, crankModel A engine
Quote:
The 153 crank would be great, but it is to short for the A block. The A block is wide between 2,3 cylinders because of the dist. going through the head and into the block. |
|
10-05-2015, 07:30 PM | #19 |
Senior Member
Join Date: May 2010
Location: Southern Upstate New York
Posts: 1,161
|
Re: 5 main, chev, crankModel A engine
George, I don't think you can get a "smooth" firing order using the V8 90 degree crank. Depending on how you set up the valve timing, a 720 degree firing cycle would go 180-90-180-270 or 180-270-180-90. You can't get 180 degrees of crankshaft rotation between each of the 4 cylinders in the firing cycle. Seems to me the engine would run ruff.
__________________
AL in NY |
10-05-2015, 07:46 PM | #20 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: 5 main, chev, crankModel A engine
Yep, as Al said..........I wonder if it will sound like a pair of John Deere tractors running together?
It will be interesting..........as well as a lot of work. What is the stroke? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|