|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-17-2014, 10:00 PM | #1 |
Member
Join Date: Jun 2010
Location: Sour Lake Texas
Posts: 54
|
Need pricing help on 36 1 1/2 ton CC
I have a 36 1 1/2 ton Cab n Chassis old Eurika Kansas fire truck and I wold like a little help on price to ask. Only rust out is the running board and the floorboard rail on right side by the door and down the middle of the hood. The cab is straight the hood is straight doors shut almost like new ( solid) the left finder has small dint the right finder has one about 6 or 7 inches and pretty deep. Back of cab solid no rust and no dents. left window white new glass in front right side has small crack but clear rear is clear.
I have pictures but have never put any on here Email [email protected] I will be thanking you for any help or tell me to go somewhere else if this is not the correct place. Thanks once more |
05-18-2014, 06:41 AM | #2 |
Senior Member
Join Date: Sep 2010
Location: Independence, VA
Posts: 423
|
Re: Need pricing help on 36 1 1/2 ton CC
Does it run, drive and stop?
|
Sponsored Links (Register now to hide all advertisements) |
|
05-18-2014, 11:39 AM | #3 |
Senior Member
Join Date: Jul 2010
Location: UPSTATESC
Posts: 669
|
Re: Need pricing help on 36 1 1/2 ton CC
solid body trucks like yours go for $1500 to $5000 around here really depends on if they can be made to run and are complete. real nice, non running 36 1 1/2 ton located near here brought a premium price of $6000
|
05-18-2014, 12:45 PM | #4 |
Junior Member
Join Date: Nov 2013
Location: Deberry, Tx
Posts: 24
|
Re: Need pricing help on 36 1 1/2 ton CC
I paid 2200 for my mostly complete 34 1 1/2 ton, and there was a 38 I believe for sale on craigslist a little while ago that was nice ran and drove for 8500 I think. If it's nice and doesn't run I'd say at least 4-5000, running 6-8000 maybe. Just my opinion, they large trucks are kind of uncommon down here.
|
05-18-2014, 01:10 PM | #5 |
Junior Member
Join Date: Nov 2013
Location: Deberry, Tx
Posts: 24
|
Re: Need pricing help on 36 1 1/2 ton CC
The pricing in your area would probably be a bit less though, everything up here is absurdly expensive.
|
05-18-2014, 08:08 PM | #6 |
Member
Join Date: Jun 2010
Location: Sour Lake Texas
Posts: 54
|
Re: Need pricing help on 36 1 1/2 ton CC
Sponsored Links (Register now to hide all advertisements)
Thanks from Bubba in Texas |
05-19-2014, 12:53 AM | #7 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,644
|
Re: Need pricing help on 36 1 1/2 ton CC
Bubba, I would place some emphasis on the value of thefire equipment. A simple hose truck would be valued more for the Ford, as opposed to a pumper truck which could quadruple the value of the truck.
__________________
Alan |
|
|
Sponsored Links (Register now to hide all advertisements) |
|