New 94 Carb Holley 94

[Phil Gillespie]

Wanting to source for a friend:
A new made in USA Holley 94 Carb. Primary Carb use
Looking for the above carb for a friend most on Ebay seem to be of China origin. Can get the Stromberg 97 in NZ but its a Holly 94 he wants.
Appreciate any assistance.
Phil NZ

[o2bnkc]

Dennis Carpenter sells them.

[aussie merc]

edelbrock make a replacement but its out there pricewise down here

[jayvee34]

Try Speedway Motors, they have them. Speedwaymotors.com

[Phil Gillespie]

Originally Posted by jayvee34

Try Speedway Motors, they have them. Speedwaymotors.com

Are the Speedway Motors ones the" Super 7" version hich has not been reviewed well on here?
Phil NZ

[ford38v8]

Sponsored Links (Register now to hide all advertisements)

Why does everyone want a new foreign made 94 when so many originals are still out there?

[Phil Gillespie]

Originally Posted by ford38v8

Why does everyone want a new foreign made 94 when so many originals are still out there?

Reason for my query on here. Want a new made in USA genuine Holley 94 Carb
prinary.
Phil NZ

[Phil Gillespie]

Here is a reply from a query on a carb for sale on Ebay


New message from: performanceoverstock
No, these new units are neither genuine Holley, or made in the USA. These new castings are produced in China and assembled by us here in Jacksonville FL.
Thanks
So the ones for sale from Carpenters, C & G, 3rd Generation are the real deal?
Note these new carbs come without the regular 94 or Ford markings.
Phil NZ

[Charlie ny]

Mac VanPelt sells new 94's, very high quality.
Charlie ny

[ford38v8]

So, again my question. The new carbs are not made in USA, nor Ford, nor Holley, and not correct for the Concourse. With all the excellent original carbs available, why a new wannabe?

[Phil Gillespie]

Originally Posted by Charlie ny

Mac VanPelt sells new 94's, very high quality.
Charlie ny

Charlie,
appreciate your endorsement will check it out.
My friend wants a new carb hence my queries.
Phi NZ

[jayvee34]

Originally Posted by Phil Gillespie

Are the Speedway Motors ones the" Super 7" version hich has not been reviewed well on here?
Phil NZ

Yes that is them, I thought they carried the Holley 94's, sorry.

[Phil Gillespie]

Cant seem to find carbs listed on Van Pelts Site???
Phil NZ

[KiWinUS]

Some years back while on. Tour of Carpenters museum I ventured into a room (possibly should not have been in there) where new 94 carbs were being assembled. All the boxes containing the many parts were labeled “made in China “ I know others have contested my statement but I seen it with my own peepers.

[Phil Gillespie]

Originally Posted by KiWinUS

Some years back while on. Tour of Carpenters museum I ventured into a room (possibly should not have been in there) where new 94 carbs were being assembled. All the boxes containing the many parts were labeled “made in China “ I know others have contested my statement but I seen it with my own peepers.

Well Tony have already had this confirmed from another carb supplier in USA.
Not one of the well know ones on this site.

Castings are done in China shipped to USA then built in USA. Again nil 94 or Ford casting ID's on carb bodies.
Phil NZ

[Gene F]

Speedway, has them, and more than one design of these to chose from.

[Charlie ny]

Phil,
Pg 35 of VanPelt's catalog.........pre 8BA, 8BA and truck.
Charlie ny

[Phil Gillespie]

Originally Posted by Charlie ny

Phil,
Pg 35 of VanPelt's catalog.........pre 8BA, 8BA and truck.
Charlie ny

Thanks very much now have the location.
Phil NZ

[Bigmac48]

Charlie ,do you rebuild the super 9 big 7 carbs . Tried to private message you but forum says I don't have enough post ?? Thank you

[Shoovel]

Your best bet is to call VanPelts. I spoke with Shelly and they still have a few US made carbs.

[Phil Gillespie]

Originally Posted by Shoovel

Your best bet is to call VanPelts. I spoke with Shelly and they still have a few US made carbs.

Thanks for that info.
Phil NZ

[Charlie ny]

Bigmac,
I will suggest Max [email protected]
Charlie ny

[51504bat]

Originally Posted by Bigmac48

Charlie ,do you rebuild the super 9 big 7 carbs . Tried to private message you but forum says I don't have enough post ?? Thank you

Check with Unclemax for Stromberg carbs.

[Bigmac48]

Thank you , haven't posted here much , more on the hamb , I drove my 40 sedan over 2100 miles last Sept. from Md. to Springfield Mo. and back only one hicup with carbs the whole trip . Still starts fine but loaded up some after warm up just last week . Had some questions , suggestions on repair ,these carbs were on my 40 when I bought it over 4 yrs ago . Thank you , will check out the person you recommend . Big mac48

[Bigmac48]

Is madmax46 and uncle max one in the same ? Or 2 diff people ? Thank you.

[scicala]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Bigmac48

Is madmax46 and uncle max one in the same ? Or 2 diff people ? Thank you.

Yes, Uncle Max is Max Musgrove AKA madmax46
The Stromberg guru.

Sal

[Bigmac48]

2 more post and I can private message !!!!! Yea buddy !!

[KiWinUS]

Phil I have a brand new Ford 1 1/16 carb for what I believe is a 56 Ford if your interested. Has auto choke.
Cheers
Tony

[Bigmac48]

Thank you , thought someone on here might have had experience in rebuilding , adjusting the super 9 big 7 carbs that came on my 40 . We're on my 40 when I bought it over 4 yrs ago and by " the Grace of God " got me down and back on my 6 day 2100 mile round trip last Sept Md. To Mo. and back .

[Phil Gillespie]

Originally Posted by KiWinUS

Phil I have a brand new Ford 1 1/16 carb for what I believe is a 56 Ford if your interested. Has auto choke.
Cheers
Tony

Tony appreciate your kind offer but now have this sorted and am rebuilding another as a backup.
many thanks
Phil NZ

[scicala]

For the price of those new 94's that Vanpelts sells ($495), you can buy two complete and rebuildable used 94's and make then look and run like new.

Sal

[Bigmac48]

Oh well ! I tried