Chevy/8BA distributors

[Charlie ny]

The demand for sbc distributors converted for use in 8BA flatheads

remains surprisingly strong. For anyone contemplating one of mine I wanted
to refresh where I'm at......I'll need a good core Chevy distributor iron
or aluminum from '57 to '65 that features the adjusting 'window' in the

cap. Inspect the core carefully to be sure the shaft and bushings are in good shape and all small parts are there. The core you send will be the distributor

shipped back to you.

All mechanical advance....................................$290 sh incl'd
Mech adv with add'l 8* vacuum can..................$315 sh incl'd
Either type feature new NAPA points, cond, cap and rotor. Set up with 20*

mech adv with an adjustable stop for full mech , tunable without removal
from the motor.
The core must be Delco....the off shore repop casting quality is worse
than horrible.
No big deal but I've a put little into tooling so now I'm able to build
these one or two at a time and not collect 30 orders.
Charlie ny