The Ford Barn

Shampipple · 11-28-2021, 06:39 PM

I’m actively converting my 38 Frame with 36 Spindles over to 39 Spindles and Juice Brakes.

I bought the brake hose brackets.

Can anyone share a photo of the factory location of the hose brackets?

Sent from my iPhone using Tapatalk

1939mars · 11-28-2021, 07:48 PM

Hope these help.

Tinker · 11-29-2021, 01:23 AM

A 38 frame should have most of the holes already there.

Richard Lacey has kits. Used his for a mid frame MC 38 conversion. Went with a 39 pedal later. All the lines worked with some small MC reroute. They have all the lines wheel to wheel. If a 39 pedal version, just let them know what you are doing. Spiral rock guards... etc. Very good stuff.

http://www.earlyv8garage.net/?redirect=false

If I get around to it this work week I'll take some pictures.

V8COOPMAN · 11-29-2021, 03:06 AM

Quote:

Originally Posted by Shampipple

I’m actively converting my 38 Frame with 36 Spindles over to 39 Spindles and Juice Brakes.

I bought the brake hose brackets.

Can anyone share a photo of the factory location of the hose brackets?

Sent from my iPhone using Tapatalk

Here are some pics that should head you in the right directions. DD

Looking FORWARD

Notice brake line follows each individual radius rod.

.

Shampipple · 11-29-2021, 11:52 AM

Thank you all!

I see I’m in need of an e brake bracket as well.

Sent from my iPhone using Tapatalk

Shampipple · 11-29-2021, 07:04 PM

Sponsored Links (Register now to hide all advertisements)

Do any of you know if this cable bracket is reproduced?

Sent from my iPhone using Tapatalk

V8COOPMAN · 11-29-2021, 07:31 PM

.

I doubt that bracket is reproduced, but it would not be difficult to make in your garage. If you'll look at the picture below, you can see the bolt passing through the top end of that bracket. DD

Shampipple · 11-29-2021, 07:44 PM

Not an issue at all. I really appreciate all of your help on this build. I am sure I can make one if I have to.

Sent from my iPhone using Tapatalk

Shampipple · 12-02-2021, 05:08 PM

Thanks again fellas. It’s coming along.

Sent from my iPhone using Tapatalk

Shampipple · 12-07-2021, 04:43 PM

I fabricated a bracket for the e brake cable. I appreciate seeing your photos. They definitely helped. And yes, that’s a brake hose bracket. Same diameter hole, and some stamped support in it.

Sent from my iPhone using Tapatalk

11-28-2021, 06:39 PM	#1
Shampipple Senior Member Join Date: Aug 2021 Location: Flat Rock, Michigan Posts: 140	1939 Juice Brake Hose question. I’m actively converting my 38 Frame with 36 Spindles over to 39 Spindles and Juice Brakes. I bought the brake hose brackets. Can anyone share a photo of the factory location of the hose brackets? Sent from my iPhone using Tapatalk __________________ 29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird

11-29-2021, 01:23 AM	#3
Tinker Senior Member Join Date: May 2010 Location: MN Posts: 7,053	Re: 1939 Juice Brake Hose question. A 38 frame should have most of the holes already there. Richard Lacey has kits. Used his for a mid frame MC 38 conversion. Went with a 39 pedal later. All the lines worked with some small MC reroute. They have all the lines wheel to wheel. If a 39 pedal version, just let them know what you are doing. Spiral rock guards... etc. Very good stuff. http://www.earlyv8garage.net/?redirect=false If I get around to it this work week I'll take some pictures. Last edited by Tinker; 11-29-2021 at 02:06 AM.

11-29-2021, 11:52 AM	#5
Shampipple Senior Member Join Date: Aug 2021 Location: Flat Rock, Michigan Posts: 140	Re: 1939 Juice Brake Hose question. Thank you all! I see I’m in need of an e brake bracket as well. Sent from my iPhone using Tapatalk __________________ 29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird

11-29-2021, 07:04 PM	#6
Shampipple Senior Member Join Date: Aug 2021 Location: Flat Rock, Michigan Posts: 140	Re: 1939 Juice Brake Hose question. Sponsored Links (Register now to hide all advertisements) Do any of you know if this cable bracket is reproduced? Sent from my iPhone using Tapatalk __________________ 29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird

11-29-2021, 07:31 PM	#7
V8COOPMAN Senior Member Join Date: May 2010 Location: East Shore of LAKE HOUSTON Posts: 11,106	Re: 1939 Juice Brake Hose question. . I doubt that bracket is reproduced, but it would not be difficult to make in your garage. If you'll look at the picture below, you can see the bolt passing through the top end of that bracket. DD __________________ *Click Links Below* __ ▼ *'35-'36 W/8BA & MECHANICAL FAN* *T5 W/TORQUE TUBE*

11-29-2021, 07:44 PM	#8
Shampipple Senior Member Join Date: Aug 2021 Location: Flat Rock, Michigan Posts: 140	Re: 1939 Juice Brake Hose question. Not an issue at all. I really appreciate all of your help on this build. I am sure I can make one if I have to. Sent from my iPhone using Tapatalk __________________ 29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird

12-02-2021, 05:08 PM	#9
Shampipple Senior Member Join Date: Aug 2021 Location: Flat Rock, Michigan Posts: 140	Re: 1939 Juice Brake Hose question. Thanks again fellas. It’s coming along. Sent from my iPhone using Tapatalk __________________ 29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird

12-07-2021, 04:43 PM	#10
Shampipple Senior Member Join Date: Aug 2021 Location: Flat Rock, Michigan Posts: 140	Re: 1939 Juice Brake Hose question. I fabricated a bracket for the e brake cable. I appreciate seeing your photos. They definitely helped. And yes, that’s a brake hose bracket. Same diameter hole, and some stamped support in it. Sent from my iPhone using Tapatalk __________________ 29 Model A Roadster, 39 Pickup, 50 Custom Tudor, 66 Mustang Fastback, 79 F350, 02 Thunderbird

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode