The Ford Barn

36coupe3w · 12-18-2010, 09:15 AM

Looking for a source for Ford 1936 1/2 ton pickup cab & bed mounting bolts. I have none to compare with for replacements . Thank you in advance
Bill

Mike in Mass · 12-18-2010, 09:27 AM

Hi Bill Roy Nacewicz is the man you want super nice guy ,Not too many places you can call them 5 minutes befor they close (his time) and the owner answers Talked to him for a half an hour I needed the same things for my 39 pic-up tel 734 654 9450 fax 734 654 9530 Super guy to deal with and knows his stuff mike p

Mike in Mass · 12-18-2010, 09:56 AM

www. fordbolts.com forgot that one MP

Steel 35 · 12-18-2010, 10:55 AM

Roy helped me with the two I needed, you may need the wedges that go second set back under the bed. Looks like a tapered piece of pipe that fits the conture of the frame under the nuts. Don't know if Roy has them or not but would be a good question when your learning from him.....

Lawson Cox · 12-18-2010, 12:02 PM

Sponsored Links (Register now to hide all advertisements)

Yes, Roy has those wedges. They will have to be drilled out just a tad to fit the bolts. They are rough castings, but NOS.

12-18-2010, 09:15 AM	#1
36coupe3w Member Join Date: May 2010 Posts: 82	1936 Ford pickup cab & bed mounting bolts Looking for a source for Ford 1936 1/2 ton pickup cab & bed mounting bolts. I have none to compare with for replacements . Thank you in advance Bill

12-18-2010, 09:27 AM	#2
Mike in Mass Senior Member Join Date: May 2010 Location: PLYMOUTH MASS Posts: 860	Re: 1936 Ford pickup cab & bed mounting bolts Hi Bill Roy Nacewicz is the man you want super nice guy ,Not too many places you can call them 5 minutes befor they close (his time) and the owner answers Talked to him for a half an hour I needed the same things for my 39 pic-up tel 734 654 9450 fax 734 654 9530 Super guy to deal with and knows his stuff mike p

12-18-2010, 09:56 AM	#3
Mike in Mass Senior Member Join Date: May 2010 Location: PLYMOUTH MASS Posts: 860	Re: 1936 Ford pickup cab & bed mounting bolts www. fordbolts.com forgot that one MP

12-18-2010, 10:55 AM	#4
Steel 35 Senior Member Join Date: May 2010 Location: Southern OR. Posts: 222	Re: 1936 Ford pickup cab & bed mounting bolts Roy helped me with the two I needed, you may need the wedges that go second set back under the bed. Looks like a tapered piece of pipe that fits the conture of the frame under the nuts. Don't know if Roy has them or not but would be a good question when your learning from him..... Last edited by Steel 35; 12-18-2010 at 11:00 AM.

12-18-2010, 12:02 PM	#5
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: 1936 Ford pickup cab & bed mounting bolts Sponsored Links (Register now to hide all advertisements) Yes, Roy has those wedges. They will have to be drilled out just a tad to fit the bolts. They are rough castings, but NOS.