|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-12-2020, 03:21 PM | #1 |
Junior Member
Join Date: Nov 2011
Posts: 5
|
49-50 Ignition Switch Bezel Removal
Is the ignition switch bezel on the outside of dashboard of 49-50 ignition switches just clipped on, so that I can just use a screwdriver to pop it off? I don't want to start prying if there's something else holding it on.
Thx. Wayne |
01-12-2020, 03:53 PM | #2 |
Senior Member
Join Date: Nov 2010
Location: Delanco, New Jersey
Posts: 115
|
Re: 49-50 Ignition Switch Bezel Removal
Green Bible page 173 figure 88 indicates bezel is removed by carefully prying off. Switch is removed once bezel is off turn switch 1/8 clockwise until lugs line up with slots in dash panel.
Hope this helps, Tom |
Sponsored Links (Register now to hide all advertisements) |
|
01-12-2020, 08:25 PM | #3 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,035
|
Re: 49-50 Ignition Switch Bezel Removal
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|