|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-12-2017, 06:26 PM | #1 |
Senior Member
Join Date: Jan 2012
Location: Nine Mile Falls,WA
Posts: 900
|
Installing door glass on a 46
I'm at the point where I can install the roll up glass in my coupe doors. I'm not sure if the receivers on the metal part that holds the glass need to face the door, or the inside of the cabin? It's a 50-50 shot but I want to get it right.
Thanks for your help.
__________________
The sign of a good craftsman is how well they cover up their mistakes. |
07-12-2017, 08:27 PM | #2 |
Senior Member
Join Date: Jul 2014
Location: Guston,ky
Posts: 653
|
Re: Installing door glass on a 46
Sponsored Links (Register now to hide all advertisements)
Remember the felt on the vent window divider goes to the outside so the vent window pulls up to it when the window is closed. This shows the wide side of the divider to the same side as the tabs. Makes me believe the tabs go to the inside of the car. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|