The Ford Barn

jax55 · 09-22-2015, 11:26 AM

Bill. I may have missed something, but wondered how these are coming along? Just curious as I have not see n anything for a couple of months.
Thanks..... just curious.

briphaeton · 09-23-2015, 10:11 AM

I'm interested to.

rally 1 · 09-23-2015, 11:03 AM

I'll take 2.
Ken

haag1332 · 10-05-2015, 08:15 PM

Sorry guys,

I've been working on these just way more tedious than I thought. Coupled with a minor stay in the hospital last month and some cracked ribs last Sunday, lol, I am slowly but surely getting them done.

Actually I did rebroach them all and such. Just working on the stamping at this point. I am gonna try and make fixture right quick to speed this process up, as well as put a stop to the smashed fingers and numb tingling sensations, lol.

Once they are stamped I can rip through the heat treat and temper process, then ship.

Shouldn't be long now.

I know there are some of you who are new to this and have expressed interest. I will message you on here and confirm with you wether or not I can add you to the list within the next couple of days.

Hope everyone is doing well, and I sincerely appreciate the patience you have all shown with regard to this process.

Bill

Bill in SoCal · 10-05-2015, 08:42 PM

Bill

Good Heavens - there is no need to apologize. You are doing us a favor.

Thanks, Bill

PS sorry to hear about the cracked ribs - was a motorcycle involved? I've had a few bounces, but haven't ridden a dirt bike in years. Bill

haag1332 · 10-05-2015, 09:01 PM

Sponsored Links (Register now to hide all advertisements)

Motorcycle was not involved although thats what I should tell everyone since it sounds more manly. I could say I crashed one of my sons race bikes on a test ride or something, lol. Unfortunately it was the side of the bathtub when I slipped and fell. My wife keeps teasing me about being one step away from being sent to a geriatric ward, lol. Getting better, don't need quite as many pain killers to breath for the last couple of days, lol.

Brubaker · 10-05-2015, 10:18 PM

A little late to the party, but one for me as well. Maybe others in our Model A club will be interested to help with shipping cost(s). If you know anyone selling at/in Tulare (Ca) early next year, that's a great venue for Model A stuff.

TinCup · 10-05-2015, 10:33 PM

When do you estimate these will be ready?

Ray in La Mesa · 10-05-2015, 11:22 PM

As aways, patiently waiting.

tbirdtbird · 10-05-2015, 11:40 PM

why not just skip the stamping?

Henry's Lady's Man · 10-06-2015, 12:04 AM

Hope you recover well! Put me in for ONE too please? And Thanx for the hard work. Chuck

smittykid · 10-06-2015, 08:10 AM

I am interested in 1 as well. I tried to read all the posts. Was a final cost ever mentioned (with or w/o shipping)? Thanks, Smitty

Mike V. Florida · 10-06-2015, 09:55 AM

Quote:

Originally Posted by Bill in SoCal

Bill

Good Heavens - there is no need to apologize. You are doing us a favor.

Thanks, Bill

PS sorry to hear about the cracked ribs - was a motorcycle involved? I've had a few bounces, but haven't ridden a dirt bike in years. Bill

Same here!!!

Dave O'Neill · 10-06-2015, 05:31 PM

I am also late to the party, but would be happy to take 3 of the sockets please, if possible.

haag1332 · 10-06-2015, 11:19 PM

With regard to the stamping, it's kind of a must do, as well as most members said they wanted them stamped. Guess it's kinda the one off personalized thing that most appreciate.

As I said, I will see where we stand for our first run and let the new interested folks know if I can fill there orders when the sockets are complete within the next day or so.

Without my list, I know we were over 120, and this run is only 150 minus ones I screw up. I will go over the list, and see what new orders we can accept for the first run in the order of expressed interest.

All of you who already received confirmation from me are guaranteed to get your sockets so don't worry, the original orders will be filled first.

Again, I will get to the newcomers within the next day or so to confirm or deny your order regarding this batch of sockets.

With regard to the question about final pricing and shipping or what have you. I believe the post with the pricing info was post #65. If this is incorrect could someone please correct me since I do not have time to look back through this evening

Bill

haag1332 · 10-06-2015, 11:22 PM

Lol,

I won't mention the member, but thank you for letting me know within seconds of my post that the pricing was actually post #64, although I could have sworn it was #65.

Bill

jax55 · 10-07-2015, 09:56 AM

Bill, I am with Mike and Bill . No need to apologize, you have done plenty already!
I guess in started this again asking for an update, sorry. Still patiently waiting, and it sounds like things are moving along. Take care of yourself....... We can wait.

wrecker king · 10-07-2015, 10:23 AM

I would like one please.

thanks

John Gott

midgetracer · 10-07-2015, 06:23 PM

I would like one also.
Rod Reetz

smittykid · 10-08-2015, 05:15 AM

Put me down for one. Hope the ribs are feeling better. I had a broken rib once due to a non-at fault motorcycle accident. Makes sneezing a real B*TCH! Get well.

09-22-2015, 11:26 AM	#201
jax55 Senior Member Join Date: May 2014 Location: Santa Barbara, Ca Posts: 329	Re: carburetor 13/32 deep well socket Bill. I may have missed something, but wondered how these are coming along? Just curious as I have not see n anything for a couple of months. Thanks..... just curious.

09-23-2015, 10:11 AM	#202
briphaeton Senior Member Join Date: Jan 2012 Posts: 241	Re: carburetor 13/32 deep well socket I'm interested to.

09-23-2015, 11:03 AM	#203
rally 1 Senior Member Join Date: Aug 2010 Location: Cleveland, Ohio Posts: 171	Re: carburetor 13/32 deep well socket I'll take 2. Ken

10-05-2015, 08:15 PM	#204
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Sorry guys, I've been working on these just way more tedious than I thought. Coupled with a minor stay in the hospital last month and some cracked ribs last Sunday, lol, I am slowly but surely getting them done. Actually I did rebroach them all and such. Just working on the stamping at this point. I am gonna try and make fixture right quick to speed this process up, as well as put a stop to the smashed fingers and numb tingling sensations, lol. Once they are stamped I can rip through the heat treat and temper process, then ship. Shouldn't be long now. I know there are some of you who are new to this and have expressed interest. I will message you on here and confirm with you wether or not I can add you to the list within the next couple of days. Hope everyone is doing well, and I sincerely appreciate the patience you have all shown with regard to this process. Bill

10-05-2015, 08:42 PM	#205
Bill in SoCal Senior Member Join Date: May 2010 Location: Claremont, CA 91711 Posts: 244	Re: carburetor 13/32 deep well socket Bill Good Heavens - there is no need to apologize. You are doing us a favor. Thanks, Bill PS sorry to hear about the cracked ribs - was a motorcycle involved? I've had a few bounces, but haven't ridden a dirt bike in years. Bill

10-05-2015, 09:01 PM	#206
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Sponsored Links (Register now to hide all advertisements) Motorcycle was not involved although thats what I should tell everyone since it sounds more manly. I could say I crashed one of my sons race bikes on a test ride or something, lol. Unfortunately it was the side of the bathtub when I slipped and fell. My wife keeps teasing me about being one step away from being sent to a geriatric ward, lol. Getting better, don't need quite as many pain killers to breath for the last couple of days, lol.

10-05-2015, 10:18 PM	#207
Brubaker Senior Member Join Date: May 2010 Location: Northern California Posts: 765	Re: carburetor 13/32 deep well socket A little late to the party, but one for me as well. Maybe others in our Model A club will be interested to help with shipping cost(s). If you know anyone selling at/in Tulare (Ca) early next year, that's a great venue for Model A stuff.

10-05-2015, 10:33 PM	#208
TinCup Senior Member Join Date: May 2010 Location: OKC / Tonkawa, Ok. Posts: 1,977	Re: carburetor 13/32 deep well socket When do you estimate these will be ready? __________________ Oklahoma City Model A Restorers Group.

10-05-2015, 11:22 PM	#209
Ray in La Mesa Senior Member Join Date: May 2010 Location: La Mesa Ca Posts: 1,166	Re: carburetor 13/32 deep well socket As aways, patiently waiting.

10-05-2015, 11:40 PM	#210
tbirdtbird BANNED Join Date: May 2012 Location: inside your RAM Posts: 3,134	Re: carburetor 13/32 deep well socket why not just skip the stamping? __________________ '31 180A

10-06-2015, 12:04 AM	#211
Henry's Lady's Man Senior Member Join Date: Apr 2015 Location: Albuquerque, NM Posts: 441	Re: carburetor 13/32 deep well socket Hope you recover well! Put me in for ONE too please? And Thanx for the hard work. Chuck __________________ ... prosperity is not the product of charity but of industry - HENRY FORD

10-06-2015, 08:10 AM	#212
smittykid Senior Member Join Date: Jul 2014 Location: NW Pa./Sc. Posts: 252	Re: carburetor 13/32 deep well socket I am interested in 1 as well. I tried to read all the posts. Was a final cost ever mentioned (with or w/o shipping)? Thanks, Smitty

10-06-2015, 05:31 PM	#214
Dave O'Neill Junior Member Join Date: Aug 2012 Location: United Kingdom Posts: 3	Re: carburetor 13/32 deep well socket I am also late to the party, but would be happy to take 3 of the sockets please, if possible. __________________ www.oneillvintageford.co.uk Your Model A Ford parts supplier in the UK

10-06-2015, 11:19 PM	#215
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket With regard to the stamping, it's kind of a must do, as well as most members said they wanted them stamped. Guess it's kinda the one off personalized thing that most appreciate. As I said, I will see where we stand for our first run and let the new interested folks know if I can fill there orders when the sockets are complete within the next day or so. Without my list, I know we were over 120, and this run is only 150 minus ones I screw up. I will go over the list, and see what new orders we can accept for the first run in the order of expressed interest. All of you who already received confirmation from me are guaranteed to get your sockets so don't worry, the original orders will be filled first. Again, I will get to the newcomers within the next day or so to confirm or deny your order regarding this batch of sockets. With regard to the question about final pricing and shipping or what have you. I believe the post with the pricing info was post #65. If this is incorrect could someone please correct me since I do not have time to look back through this evening Bill

10-06-2015, 11:22 PM	#216
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Lol, I won't mention the member, but thank you for letting me know within seconds of my post that the pricing was actually post #64, although I could have sworn it was #65. Bill

10-07-2015, 09:56 AM	#217
jax55 Senior Member Join Date: May 2014 Location: Santa Barbara, Ca Posts: 329	Re: carburetor 13/32 deep well socket Bill, I am with Mike and Bill . No need to apologize, you have done plenty already! I guess in started this again asking for an update, sorry. Still patiently waiting, and it sounds like things are moving along. Take care of yourself....... We can wait.

10-07-2015, 10:23 AM	#218
wrecker king Junior Member Join Date: Apr 2015 Posts: 21	Re: carburetor 13/32 deep well socket I would like one please. thanks John Gott

10-07-2015, 06:23 PM	#219
midgetracer Senior Member Join Date: May 2010 Location: Bismarck ND Posts: 1,189	Re: carburetor 13/32 deep well socket I would like one also. Rod Reetz

10-08-2015, 05:15 AM	#220
smittykid Senior Member Join Date: Jul 2014 Location: NW Pa./Sc. Posts: 252	Re: carburetor 13/32 deep well socket Put me down for one. Hope the ribs are feeling better. I had a broken rib once due to a non-at fault motorcycle accident. Makes sneezing a real B*TCH! Get well.