Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-14-2021, 04:57 PM   #1
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,892
Default Trunk lid handle not locking

My trunk lid lock has stopped locking. The key still turns and the handle opens and closes properly, but it doesn’t lock. Is there a DIY fix for this or should I just take it to a locksmith? It is not an original, it’s an older replacement (previous owner).
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Old 01-14-2021, 07:21 PM   #2
Oldgearz
Senior Member
 
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 359
Default Re: Trunk lid handle not locking

Most likely the small latch that moves horizontally when the key is turned has broken off. No fix for this that I know off. I had same problem. The suppliers do not have replacements in stock and all say wait till June. Some do have the scroll style Cabriolet handle available.
Oldgearz is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-14-2021, 08:17 PM   #3
McMimmcs
Senior Member
 
McMimmcs's Avatar
 
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
Default Re: Trunk lid handle not locking

Try to find an original or a rebuilt. I bought 2 reproductions and neither would lock !
McMimmcs is offline   Reply With Quote
Old 01-17-2021, 08:59 AM   #4
Superhart
Senior Member
 
Superhart's Avatar
 
Join Date: Nov 2019
Location: Hilton head, South Carolina
Posts: 118
Default Re: Trunk lid handle not locking

I had a funny thing going on. When I bought my 1930 Coupe the trunk handle was installed with the handle facing down (6 o'clock) and it wouldn't lock. After a bit of time trying to figure it out, I removed the lock and handle and noticed the position of the slots on the lock that the handle tang is supposed to slide into. When I installed the handle facing UP (12 o'clock) the handle now locks easily. Finally I noticed other Coupes with the handle installed facing up so I guess that is the way it's supposed to be done.
Superhart is offline   Reply With Quote
Old 01-17-2021, 12:06 PM   #5
700rpm
Senior Member
 
700rpm's Avatar
 
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,892
Default Re: Trunk lid handle not locking

Sponsored Links (Register now to hide all advertisements)
I just ordered a new one from Mike’s.
__________________
Ray Horton, Portland, OR


As you go through life, keep your eye on the donut, not the hole.
700rpm is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:01 AM.