The Ford Barn

russcc · 02-26-2021, 05:28 PM

Please see photos. This is the channel that screws to the front of the door jamb edge, and the kick panel fits into it, plus it retains the windlace in that area. The side I do have is pretty beat up, so I would like to find a replacement ones. Does someone have a part # for this piece or source for it ? Thank you.

19Fordy · 02-26-2021, 06:12 PM

You could actually use other kick panel strips like this
https://www.macsautoparts.com/ford-p...BoCOiIQAvD_BwE

or Bob Drake has these kick panel retainers strips.
https://bobdrake.com/products/1937-4...8e5907ab&_ss=r

C and G has kick panel retainer strips also.
https://cgfordparts.com/ufolder/cgca...&searchnumber=

or you could make your own.

russcc · 02-27-2021, 07:43 AM

Sponsored Links (Register now to hide all advertisements)

Thank you. I will check those sources out.

02-26-2021, 06:12 PM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,921	Re: '40 Part ID & source You could actually use other kick panel strips like this https://www.macsautoparts.com/ford-p...BoCOiIQAvD_BwE or Bob Drake has these kick panel retainers strips. https://bobdrake.com/products/1937-4...8e5907ab&_ss=r C and G has kick panel retainer strips also. https://cgfordparts.com/ufolder/cgca...&searchnumber= or you could make your own. Last edited by 19Fordy; 02-26-2021 at 06:36 PM.

02-27-2021, 07:43 AM	#3
russcc Senior Member Join Date: May 2010 Posts: 2,871	Re: '40 Part ID & source Sponsored Links (Register now to hide all advertisements) Thank you. I will check those sources out.