|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-13-2021, 06:05 AM | #1 |
Junior Member
Join Date: Jun 2020
Posts: 25
|
53 F250 Master Cylinder copper gaskets
Hi folks, I replaced the master cylinder on the truck I am restoring and low and behold I have a leak at the copper gaskets that seal the bolt and distribution block to the master cylinder body. I was wondering if anyone new the exact dimension of those gaskets. There is a front and a rear gasket for the bolt and they are different sizes. I know I was shorted one in my order and I used what I had in my shop which I thought was very close to the size. Anyway I don’t want to mess around anymore and I want to see if I can purchase the exact size that is called for.
|
04-13-2021, 07:35 AM | #2 |
Senior Member
Join Date: Feb 2013
Location: Pittsford NY. USA
Posts: 1,096
|
Re: 53 F250 Master Cylinder copper gaskets
I had the same problem w/my '52 F1 . I took the copper gaskets/washers to my local parts store and got a couple new ones , plus a couple spares . Make sure the surface on the block is really clean! - F F
__________________
1952 Ford F1 1965 Ford Falcon Sprint 2007 Ford Mustang GT |
Sponsored Links (Register now to hide all advertisements) |
|
04-13-2021, 10:23 AM | #3 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 53 F250 Master Cylinder copper gaskets
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|