|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-16-2020, 10:14 AM | #1 |
Junior Member
Join Date: Sep 2020
Posts: 3
|
Brake Cross Shaft Diameter?
I'm going to replace the service brake cross shaft bushings on my '31. I was wondering what the diameter of the shaft, where the bushing go, should be to safely use the standard 2 piece bronze bushing. I would want to order a repair kit the same time that I order the bushings if needed. Thank youappvalley tutuapp tweakbox
Last edited by MatiasMyles; 09-18-2020 at 01:49 AM. |
09-16-2020, 10:38 AM | #2 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: Brake Cross Shaft Diameter?
I just measured one, it was 13/16" (.8125")
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! Last edited by katy; 09-16-2020 at 02:43 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
09-16-2020, 11:57 AM | #3 |
Member
Join Date: Dec 2015
Location: Brooklyn Michigan
Posts: 53
|
Re: Brake Cross Shaft Diameter?
I just did mine last week and both ends measured .079. Do a search on my post as it received several good replies. The 2 piece fit just fine with minor filing.
|
09-16-2020, 12:24 PM | #4 |
Senior Member
Join Date: May 2020
Location: Corning NY
Posts: 244
|
Re: Brake Cross Shaft Diameter?
Be careful of decimals. 13/16 is .8125. The above .079 is likely .79 inches or 25/32.
|
09-16-2020, 01:37 PM | #5 |
Member
Join Date: Dec 2015
Location: Brooklyn Michigan
Posts: 53
|
Re: Brake Cross Shaft Diameter?
I stand corrected, mine was .79. Long day
|
09-16-2020, 02:46 PM | #6 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: Brake Cross Shaft Diameter?
Sponsored Links (Register now to hide all advertisements)
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
|
|
Sponsored Links (Register now to hide all advertisements) |
|