|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-23-2010, 08:22 PM | #1 |
Junior Member
Join Date: May 2010
Posts: 29
|
1932 Steering Column Questions...
Will a 1933/34 pick-up truck commercial steering column assembly fit/work in a 1932 Coupe? What is different besides the steering ratio?
Thank you in advance for your help. Walt |
11-23-2010, 09:47 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
|
Re: 1932 Steering Column Questions...
No - the housing that the sector shaft goes through is indexed differently . Pass and pickup are the same in 33-34 except the coulmn drop .
|
Sponsored Links (Register now to hide all advertisements) |
|
11-23-2010, 10:38 PM | #3 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,308
|
Re: 1932 Steering Column Questions...
You can put a 32 sector housing on that steering box.The other thing is the 33-34 worm shaft is a bit over an inch longer than a 32.
|
11-24-2010, 06:46 AM | #4 |
Senior Member
Join Date: May 2010
Location: FP, NJ
Posts: 2,770
|
Re: 1932 Steering Column Questions...
Here's a website that shows the difference in the sector housings:
http://www.fordgarage.com/pages/bste...orhousings.htm
__________________
Don't never get rid of nuthin! |
11-24-2010, 08:01 AM | #5 |
Senior Member
Join Date: May 2010
Location: Powell, TN
Posts: 2,509
|
Re: 1932 Steering Column Questions...
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|