|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-17-2011, 07:13 PM | #1 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,386
|
E-brake clevis pins??
Ok, I have searched and found nothing so here goes. I am rebuilding my brakes on the roadster and was going to order new oversize clevis pins tonight and I cannot seem to find the clevis pin for the e-brake clevis. In Snyders catalog, they sell clevis pins that say "for all brake rods". This cannot be correct as the hole in the e-brake clevis is much larger. Snyders catalog has the e-brake clevis and it says it has a bigger hole but I cannot seem to see a part number for the pins. Where can I find these pins?
__________________
Respecting and Resurrecting Ford Model A's. |
11-17-2011, 07:53 PM | #2 |
Senior Member
Join Date: May 2010
Location: South East NJ
Posts: 3,398
|
Re: E-brake clevis pins??
The ebrake rod to the wheel does not have a clevis pin. The ends of the center shaft have a larger diameter male shaft that the rod goes on. The rear lever on the backing plate has the standard pin.
They may be worn and need to be welded and filed to shape. |
Sponsored Links (Register now to hide all advertisements) |
|
11-18-2011, 11:44 AM | #3 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,386
|
Re: E-brake clevis pins??
Sponsored Links (Register now to hide all advertisements)
__________________
Respecting and Resurrecting Ford Model A's. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|