|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-26-2012, 11:58 PM | #1 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 173
|
Window Felt/Bumpers
If my 35 originally came with bumpers and I want to use felt for a better seal, do I drill small holes around the window openings and garnish molding and use small flat head screws to hold it on? Do I also use the bumpers or is it one or the other?
Thanks much, Peder |
04-27-2012, 05:18 AM | #2 |
Senior Member
Join Date: May 2010
Location: N. Ft. Myers, Fl.
Posts: 502
|
Re: Window Felt/Bumpers
I used felt on my 36 and the small flathead screws to hold them in place. Be sure the screw heads are well below the fuzzy stuff or they will scratch the window glass. No bumpers.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-27-2012, 07:51 AM | #3 |
Senior Member
Join Date: May 2010
Location: Plano, Texas
Posts: 862
|
Re: Window Felt/Bumpers
I used small pop rivets on my 35.
|
04-27-2012, 12:35 PM | #4 |
Senior Member
|
Re: Window Felt/Bumpers
You can use small counter sunk screws instead of flat head ones. They will bury them self down in the felt/fuzzy strips so as to not scratch the glass
|
04-27-2012, 05:01 PM | #5 |
Senior Member
Join Date: Nov 2011
Location: whitehall pa.
Posts: 439
|
Re: Window Felt/Bumpers
i vend the felts and glass felt channels at Macungie,Pa. i got away from those clips, and small screws. i use 3m super weather strip adhesive BLACK. bring the glass up about an inch or two. and i place small wooden wedges between the glass and felt strip let dry over nite. JAN.
|
04-27-2012, 06:35 PM | #6 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,973
|
Re: Window Felt/Bumpers
Sponsored Links (Register now to hide all advertisements)
|
04-29-2012, 11:25 AM | #7 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 173
|
Re: Window Felt/Bumpers
Thanks Guys,
Peder |
|
|
Sponsored Links (Register now to hide all advertisements) |
|