Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-17-2020, 02:04 PM   #1
lake_harley
Senior Member
 
Join Date: Oct 2010
Location: Uniontown, MO
Posts: 101
Default Instrument Panel Light

I'm re-doing the instrument panel in my '30 Coupe (oval speedometer), and I need a bulb for the light in the center of the instrument panel. I'm converting to 12V so need a different bulb. Somehow, I've misplaced the old 6V bulb so I don't have a sample to look for something similar. The socket is made for a double contact for the bulb, which is just a bit odd to me for a single filament bulb. I've looked in several supplier's websites and only find single contact bulbs (3 C.P.) for instrument panel lights.

The socket has two set screws from the back of the socket to retain the wires in the two terminals. Does that sound stock, or has someone substituted a different light? It has a bullet-shaped chrome cap that pulls off to get to the bulb.

Maybe someone can offer guidance?

Lynn
lake_harley is offline   Reply With Quote
Old 11-17-2020, 03:25 PM   #2
abachman3
Senior Member
 
abachman3's Avatar
 
Join Date: Jun 2013
Location: Western Springs, IL
Posts: 323
Default Re: Instrument Panel Light

Shouldbe a single filament bulb, fairly low candle power, 3cp, if I remember correctly. Higher (10cp) get too hot too quickly to be used.
abachman3 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-17-2020, 05:23 PM   #3
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,812
Default Re: Instrument Panel Light

A single filament bulb with two contacts has one contact supplying power and the other grounded. Take your ohm meter and see if one contact is grounded and one hot. Search for a bulb that matches the contact configuration with the low candlepower that abachman3 recommended. Check the pins on the sides too. For a single filament bulb with two contacts the pins should be equal in height and not offset. LED bulbs are available from Superbrightleds.com and others.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
nkaminar is offline   Reply With Quote
Old 11-17-2020, 06:22 PM   #4
lake_harley
Senior Member
 
Join Date: Oct 2010
Location: Uniontown, MO
Posts: 101
Red face Re: Instrument Panel Light

Thanks for the replies. I didn't see any reason it would be more than one filament and I did find a two-contact, single-filament bulb that fits the instrument panel light unit. 1004, is the number of the bulb, if I remember correctly from earlier this afternoon.

I did a quick test and it does light but seems quite bright. I'm just guessing it is a higher candlepower like 10 C.P. I'll do a bit more researching for a possible lower C.P. bulb than the 1004, and maybe on my next trip to the parts store I can go in armed with a bulb number.

Thanks for the help.

Lynn
lake_harley is offline   Reply With Quote
Old 11-17-2020, 11:19 PM   #5
1930 coupe
Senior Member
 
Join Date: May 2010
Posts: 226
Default Re: Instrument Panel Light

Sounds like your lite has been replaced with a replacement of some sort.
This is a original lamp with one contact.
Attached Images
File Type: jpg dash lamp.jpg (170.9 KB, 79 views)
1930 coupe is offline   Reply With Quote
Old 11-17-2020, 11:21 PM   #6
McMimmcs
Senior Member
 
McMimmcs's Avatar
 
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
Default Re: Instrument Panel Light

Sponsored Links (Register now to hide all advertisements)
[QUOTE=lake_harley;1953296]Thanks for the replies. I didn't see any reason it would be more than one filament and I did find a two-contact, single-filament bulb that fits the instrument panel light unit. 1004, is the number of the bulb, if I remember correctly from earlier this afternoon.

I did a quick test and it does light but seems quite bright. I'm just guessing it is a higher candlepower like 10 C.P. I'll do a bit more researching for a possible lower C.P. bulb than the 1004, and maybe on my next trip to the parts store I can go in armed with a bulb number.

Thanks for the help.
I think bulb 1004 is 15 candle power.
McMimmcs is offline   Reply With Quote
Old 11-17-2020, 11:33 PM   #7
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,109
Default Re: Instrument Panel Light

Back in the olden days when I first bought a Model A, mine came without a dash light. Being the enterprising teenager that I was, I devised my own. I got a 2 filament bulb, more than likely a tail/stop light. I wired the "tail" portion to come on with the lights, and the "stop" on a separate toggle switch. That way I could turn on the brighter light that would illuminate the entire floor area anytime I wanted. But what did I know, just a teenager.
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club
CarlG is offline   Reply With Quote
Old 11-18-2020, 11:19 AM   #8
lake_harley
Senior Member
 
Join Date: Oct 2010
Location: Uniontown, MO
Posts: 101
Default Re: Instrument Panel Light

Quote:
Originally Posted by McMimmcs View Post
I think bulb 1004 is 15 candle power.
Then I guess it wasn't me just thinking it was a bit bright! I can do some looking for a lower C.P. bulb, or do you happen to know the number for about a 3 C.P. that has the same base?

Using a two filament bulb is an interesting idea. "Mood" lighting and "Daylight" modes?

Lynn
lake_harley is offline   Reply With Quote
Old 11-18-2020, 11:45 AM   #9
Mister Moose
Senior Member
 
Mister Moose's Avatar
 
Join Date: Jun 2020
Location: Hartford area, CT
Posts: 374
Default Re: Instrument Panel Light

Quote:
Originally Posted by lake_harley View Post
I did a quick test and it does light but seems quite bright. I'm just guessing it is a higher candlepower like 10 C.P. I'll do a bit more researching for a possible lower C.P. bulb than the 1004, and maybe on my next trip to the parts store I can go in armed with a bulb number.

Lynn
These are all 12 V lamps with the same base you have:

1004 12W 15CP (Candlepower)
90.... 7W 6CP
68.... 8W 4CP

There are more, especially on the brighter end, but they have bigger globes that may not fit.
Mister Moose is offline   Reply With Quote
Old 11-18-2020, 12:12 PM   #10
30 Closed Cab PU
Senior Member
 
Join Date: Aug 2018
Posts: 2,332
Default Re: Instrument Panel Light

Quote:
Originally Posted by abachman3 View Post
Shouldbe a single filament bulb, fairly low candle power, 3cp, if I remember correctly. Higher (10cp) get too hot too quickly to be used.

X2 - I tried a higher power bulb, if driving at night with it on, the lamp "hood" heated up quickly hot enough to burn my fingers. As mentioned above if you wish for more light, convert to an LED bulb.
30 Closed Cab PU is offline   Reply With Quote
Old 11-18-2020, 06:56 PM   #11
lake_harley
Senior Member
 
Join Date: Oct 2010
Location: Uniontown, MO
Posts: 101
Default Re: Instrument Panel Light

Quote:
Originally Posted by Mister Moose View Post
These are all 12 V lamps with the same base you have:

1004 12W 15CP (Candlepower)
90.... 7W 6CP
68.... 8W 4CP

There are more, especially on the brighter end, but they have bigger globes that may not fit.
Thanks for that list!! Looks like a 68 bulb should do the trick at 4CP. My searching found another bulb with 4CP....a 96 bulb, providing I read the specs right. I'll look for those 2 number bulbs at the parts store.

Lynn
lake_harley is offline   Reply With Quote
Old 11-19-2020, 03:48 PM   #12
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,812
Default Re: Instrument Panel Light

If you have one contact on your connector that is positive and the other grounded, and the pins are opposite each other, then you can use a BA15D base. These bulbs are normally used in marine applications. An LED equivalent, available from Super Bright LED's is the part number 1142-CW12-G. This is a 12 volt bulb that uses 0.10 amps or 1.2 watts at 12 volts. It is advertised to last 30,000 hours. It will be bright but cool to the touch. See https://www.superbrightleds.com/more...ofit-car/1978/
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
nkaminar is offline   Reply With Quote
Old 11-19-2020, 10:16 PM   #13
lake_harley
Senior Member
 
Join Date: Oct 2010
Location: Uniontown, MO
Posts: 101
Default Re: Instrument Panel Light

nkaminar....I appreciate the suggestion. I did a bunch of searching and you're exactly right on the base being a BA15D. I'm fine with a regular bulb rather than a LED and will check my local parts store.

Thanks

Lynn
lake_harley is offline   Reply With Quote
Old 11-20-2020, 10:44 AM   #14
Badpuppy
Senior Member
 
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,140
Default Re: Instrument Panel Light

#68 is your guy.

https://www.bulbtown.com/68_Miniatur...Base_p/b68.htm
Badpuppy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:25 AM.