The Ford Barn

Aircooled1 · 05-21-2010, 10:50 AM

I have early 1935 through 1947 Ford 1/2 ton pickup parts available, I recently acquired most of two 1/2 ton pickup cabs, one chopped off top 1936 and one stock 1937 and have a lot more parts available, from frames cabs fenders & beds to hoods grills & doors,banjo rear axles & transverse spring front axles to 16" wheels & early hydraulic brakes,flathead V8 motors & parts to top loader transmissions & parts,ask and I may possibly have the part you are looking for, EMAIL FOR PICTURES, located 125 miles North of Sacramento on Highway 99, email [email protected] or call 530-384-1651

howco · 05-21-2010, 12:45 PM

Hey Aircooled, looking for a 1937 Ford 1/2 ton truck grill..

crider · 05-21-2010, 04:47 PM

I'm looking for a 35-36 glove box door.

fordzilla9 · 05-23-2010, 09:08 AM

I am looking for a 1940-41 1/2 ton pickup hood and 2 fenders in good condition.

robert stafford · 06-08-2010, 11:56 PM

I need a 35-37 pickup right front fender brace (the large one). Please advise. Thanks, Rob in WA State

blindmouse · 06-09-2010, 07:54 AM

Sponsored Links (Register now to hide all advertisements)

I need grille and front fenders for 39 pu.

40fordman · 06-17-2010, 02:10 AM

need passenger side front fender for 40 ford pick up

langan · 07-07-2010, 06:54 PM

Is this Jim? I am looking for 35-36 truck grill trim?

Mike in Mass · 07-14-2010, 06:53 PM

HI Jim still looking for a very nice steering wheel and column drop for a 39 pic-up thanks mike p

s1b · 07-21-2010, 02:52 PM

Sent you a Email about backing plates.

jessedog · 09-20-2010, 07:52 PM

I will be removing my steering wheel out of my 38 ford pu if interested in wheel and column drop with key let me know, I will be doing this starting in Nov., I have to figure out what cost to ask. Jerry

Burny · 09-20-2010, 11:36 PM

Need front fender brackets for a '37- the large ones that the headlights mount on...

badassford · 09-27-2010, 09:03 PM

You sent pics of one cab but no price. I notice that the price listed on one web site is 650 and on another it is 550.00 What are the prices on your other 35,36 cabs?

badassford · 09-27-2010, 09:04 PM

my email is [email protected]

rustyrods · 09-28-2010, 09:36 AM

I COULD USE A TITLE FOR ONE . PLEASE EMAIL [email protected]

[email protected] · 09-28-2010, 11:10 AM

hi looking for 1937 pickup grill i am calling from mass. my number is 19786675343
or my e-mail is [email protected]. thank you Jim

Gordon Ellis · 10-05-2010, 06:38 PM

Am looking for a 41 Ford 1/2 ton pickup grille. Do you have one, and whats the overall condition and price? Email me at............... [email protected]

kiwi88 · 10-22-2010, 11:55 PM

Hi. I'm looking for a pair of good or workable 36 rear p/u fenders plus a good deck. C

exoilfld · 10-25-2010, 11:10 AM

Do you have a hood pull for a 41 truck? The little handle you pull to open the hood. My email is [email protected] Thanks

Bri35Ford · 11-01-2010, 01:04 PM

Hi....... Im looking for a 35 Ford pk up inner grill shell, It has two crank holes pressed into it .

Burny · 11-03-2010, 04:48 PM

Price on right rear fender for a '35-'37?

35 rancho · 11-25-2010, 09:27 PM

I'm looking for the two oval shape doors(?) above the windshield guess they cover the hinge for the windshield.

bezerker999 · 11-26-2010, 08:05 PM

I have a 1937 Ford 1.5 ton that has a 1936 radiator shell, grill and hood and I would like to find a 1937 setup.

Hotrodvideo · 11-27-2010, 10:42 PM

I'm still looking for a '40 thru '46 mast jacket...have one??

Joe/Ct · 12-03-2010, 05:00 PM

I am looking for a radiator cap for a '41 (11A over G) car(?) radiator.

Lincoln29 · 12-04-2010, 08:11 AM

Sponsored Links (Register now to hide all advertisements)

Jim: I am looking for a original gas guage for my 35 Ford pickup. Can you help,
Jerry: [email protected]

twoboots · 12-05-2010, 09:28 PM

i am looking for 6 good 20 inch 1ton bud wheels for my 1937 ford
Thanks Al

Lincoln29 · 12-09-2010, 01:48 PM

Looking for a 35 or 36 Ford pickup Fuel Gauge. Thanks, Jerry

landshark · 12-21-2010, 05:32 PM

looking for a cowl vent bracket and handle for 41 ford 1/2 ton thanks landshark

Stillrunners · 12-28-2010, 10:05 PM

hope to drop in....next time i'm in SAC town...

Cruisin40 · 12-31-2010, 12:53 PM

I am looking for a set of rear fenders for a '41 1/2-ton. If not a pair then definitely a passenger-side one.

2831AV8 · 01-07-2011, 09:42 PM

Looking for both left and right frame center crossmembers that go between the frame rails and center crossmembers that fit 35-40 passenger or 35-41 pickup frames. Mine is a 39. [email protected] cell 603-848-6688

Steve Seidl · 01-08-2011, 11:32 AM

What is a good '35 Ford cab with good doors going for ?

carnutdean · 01-08-2011, 10:37 PM

hi, would you happen to have a good used or new window regulator for a 1941 ford drivers door?I got a emergency handle from you a while ago.thanks. [email protected] Jonathan James

klicker · 01-24-2011, 03:13 PM

Looking for later 40s backing plates for conversion for my 39 coupe. I want to keep my wide 5 drums. Any help? Advice? [email protected]

djandboo · 01-28-2011, 07:33 PM

Do you have any rear fenders for a 36 Ford pick-up?

carnutdean · 01-28-2011, 08:29 PM

hi,how about a window regulator for a 1941 ford pick up drivers side in good condition? thanks [email protected]

Randy/In · 01-29-2011, 01:25 PM

Do you have any 1935 spoked ford weels, they must be crack free. Randy/In

363coupe · 01-30-2011, 12:50 PM

Sent you a pm...how about good doors for a 40 pickup?

363coupe · 02-01-2011, 09:58 AM

I guess this guy just knows how to bump , but not answer any requests?????

ken ct · 02-01-2011, 10:26 AM

Why some people have to bump,bump,bump constantly is beond me. Once should be enough.?????????????????? ken ct.

Aircooled1 · 02-07-2011, 11:29 PM

I Answer All PM Messages Sent To Me....... Bump...

mike70gtx · 02-08-2011, 05:26 PM

I need some door handles, window guts, some dash gauges, glove box, and title. I am building a 1935 pickup rat rod so it can be weathered. My email is [email protected]

mrtexas · 02-08-2011, 10:11 PM

Looking for 40/48 hydraulic brake internal parts like bolts, cams, levers, etc.

BUTCHJ · 02-10-2011, 08:35 PM

do you have a good glove box door for a 39 ford pickup ?

36ford · 02-16-2011, 03:32 PM

Sponsored Links (Register now to hide all advertisements)

need left rear fender for 36??? really need the bottom 6-8 " that conect to the running board mine are rotted off.
thanks DD

old40ford pickupdream · 02-22-2011, 09:02 PM

looking for a good frame for a 40 ford pickup, was told a 41 sedan frame will work, but do not know. what is different from the 40 to 41 sedan that makes it not workable? if you have a good one what would be your asking price?
thank you
dick

gerrald meacham · 02-23-2011, 09:52 AM

o u have any wide wide five wheels off a truck ?

gworthen · 03-05-2011, 05:58 PM

I have 6 great 20" wheels but they are still attatched to a 1941 1.5 ton that I may want to find a home for. I will be putting it up on the swap meet as soon as I figure out how.

mike70gtx · 03-22-2011, 04:07 PM

Quote:

Originally Posted by mike70gtx

I need some door handles, window guts, some dash gauges, glove box, and title. I am building a 1935 pickup rat rod so it can be weathered. My email is [email protected]

Anything?? Also do you have a title for this?

dinokruzordinance · 04-11-2011, 10:24 PM

Do you have a inner grill plate for a 1936 truck. Below and behind the grill. A chin plate? Bolts across the frame horns and helps mount both grill and radiator. Dean - benton ar

Garrett · 04-16-2011, 10:13 AM

Hello, I'm looking for that stainless or chrome center strip for the grille of a 1938 Ford Pickup Truck (I have the "V8" emblem that fits on the top of it)
Call anytime 954-699-4247 Thank You, April

alltwistedmetals · 04-16-2011, 06:37 PM

How about a hood (top) for a '35
ford pick-up?
Shipping to Woodbridge, Va. 22191???
[email protected]

rickb9ol · 04-17-2011, 08:43 AM

looking for 35 pickup inner fenders and splash apron?

POPS29 · 05-04-2011, 04:53 PM

any 38 39 rear fenders or doors yet ?

36ford · 05-10-2011, 01:41 PM

Do you have a rear driver side 36 truck fender you could cut a lower front patch panel out of about 6" of mine is rusted out.
Thanks DD

POPS29 · 05-17-2011, 07:32 AM

Quote:

Originally Posted by Aircooled1

Just Brought In A Decent 1939 Ford Pickup Cab,Doors Are Rust Free But Right Side Door Has Several Bullet Holes At The Belt Line And Lower Hinge Needs Repair... Bump...

I will call today thanks

coldwater · 05-20-2011, 10:41 PM

Aircooled
I have a forty pickup and need a frame. mine ie completely rusted through in multiple areas, also looking for both rear fenders, and a colum drop that is complete, mine is broke. please contact at [email protected].
thanks
scott

Burny · 09-27-2011, 02:53 PM

Looking for '37 inner fender panels and the wiper covers for inside cab...

alrivera · 09-27-2011, 07:06 PM

What does "bump" mean?

NDTMAN · 10-06-2011, 07:01 AM

Interest in wheels if you do

fender bender · 10-09-2011, 08:21 AM

Looking for 3.54:1 ring and pinion old stock banjo style and grill for 40 ford pickup. Thanks, Max

macs67 · 10-10-2011, 12:00 AM

40 1/2 ton standard hood ornament, nose piece?
Hinges?
Supports?
All latch/opening hardware?
thanks

ford1946 · 10-10-2011, 12:10 AM

hello-

I am new to this site but I am looking to try and find a title for a 46 ford that I have. I would settle for any year that is close to it.

Thank you

lonewolf · 10-11-2011, 09:02 AM

Hello I just sent you an email, I'm looking for a usable roof for a 35-36 ford pickup. I have a rust free cab that some kids used as a jungle gym and crushed the roof down 3" below the tops of the doors,thanks

gilspony · 10-13-2011, 12:12 PM

Sponsored Links (Register now to hide all advertisements)

hi jim, looking for 35" 38" pickup rear window moulding, in good condition. if at all possable i rearlly could use 2. please let me know the price for them also. my email address is [email protected] THANKS GIL

russcc · 11-08-2011, 08:09 PM

Hi Aircooled

Any 40 thru 46 column mast jackets ? If so what kind of shape & price. Thanks, Russ

fasttrack · 11-24-2011, 07:50 AM

Hi looking for a nice hood and sides for a 1935 ford truck!

jvanhoover · 12-05-2011, 09:41 AM

Hey I am looking for a drivers door for my 1 1/2 ton 35, Also need gauges for dash. THis is all new to me, what is the column drop on the steering? I am looking for steering wheel and key assem. as well. Steering wheel seems to be seized up. thanks for your time.

35 fordratrod · 01-05-2012, 07:03 AM

i am about to buy a 1935 ford 1.5 t truck what i only wanna use the chassis , cab and grill to make it in to a ratrod running 351 , 4 speed manual , 9" diff shorten it , lower it possible ? i am locking for a complete right side door for it as it is missing are they hard to get ? i think the cap and grill is the same as in the pickup

ejayfordman · 01-08-2012, 03:16 PM

I need both inner fenders and all the fender braces (front and rear) for a '35-'36 Ford pickup. I also need a decent driver's side running board. Email me at [email protected] When would be a good time to call?

Aircooled1 · 01-23-2012, 12:15 PM

Call 530-384-1651 after 10:00AM PST........ Bump...

JP58854 · 02-05-2012, 10:28 AM

Looking for front Grille

JP58854 · 02-05-2012, 10:29 AM

Looking for Grille 36 ford pickup

philhauser · 03-28-2012, 04:35 PM

need clutch brake pedal assembly for 41 ford pickup call phil 401-397-56356

philhauser · 03-28-2012, 04:37 PM

need clutch brake assembly for41 ford pickup call401-397-5636

ajsrodshop · 04-08-2012, 10:33 PM

hey looking for a 39 ford drivers door , do you got one how much . can you send pictures to [email protected] thanks, Aaron

ajsrodshop · 04-09-2012, 06:57 PM

do you got a 1939 ford truck title and how much , you can email at [email protected] . thanks Aaron

Gordon Ellis · 04-09-2012, 08:30 PM

Looking for grill for 41 Ford p.u. half ton. Reply to [email protected]. Thanks

hooligan514 · 04-12-2012, 11:50 AM

Got any 1936 Pickup doors? How much you asking?

BrendonSC · 05-04-2012, 06:38 AM

Sent you a pm about some stuff.

jsteck · 07-21-2012, 03:31 PM

Quote:

Originally Posted by Aircooled1

I have early 1935 through 1941 Ford 1/2 ton pickup parts available,from frames cabs fenders & beds to hoods grills & doors,banjo rear axles & transverse spring front axles to 16" wheels & early hydraulic brakes,flathead V8 motors & parts to top loader transmissions & parts,ask and I may possibly have the part you are looking for, EMAIL FOR PICTURES, located 125 miles North of Sacramento on Highway 99, email [email protected] or call 530-384-1651

Hi Aircooled,
I need the following for a 1935 pickup:
1. spare tire mount bracketry
2. metal trim moulding that goes on cab at windshield sides, these are each about a foot long or so.
3. either 3.25 or 3.54 ring and pinion set for stock rear end. must be very good condition, no whiners.

gkgeiger · 07-26-2012, 01:27 PM

I'm looking for a nice pair of wide fives in the 5" width. PM if you have. Thanks,

voblackwood · 07-30-2012, 08:34 AM

I need a complete glove box door and hinge for 36/36 pickup
Vernon Blackwood
281-923-5000

41-steel- · 08-18-2012, 05:29 PM

Hi, after a 40-41 pickup hood and grill if you could help with either, don't matter about condition...reply to [email protected] thanks

smellycrak · 08-24-2012, 12:27 AM

Sponsored Links (Register now to hide all advertisements)

Hi There

Would you have any door hinges I need 2 left hand side and 2 right hand side, if so how much and would you USPS them to Brisbane Australia?
many thanks kenny

smellycrak · 08-27-2012, 07:22 PM

hi there

how much do you want for full set of 36 pickup hinges?
and will you post them to brisbane australia?

thanks kenny

racer2378 · 08-28-2012, 05:47 PM

do you have a set of 35-36 ford front fenders? any condition. thanks

Ray Balukas · 08-29-2012, 07:03 PM

need a 37 pu right inner front fender well

hoss50 · 09-15-2012, 11:34 PM

hey Aircooled, I need a pair of steel front fenders & also a pair of steel rear fenders & steel running boards for 35-36 Ford pickup. Have any good ones ? If so, how many pair? My email is [email protected] thanks!

the cooch · 09-18-2012, 11:28 AM

Hi! The '36 pickup seems to have a small panel between the rear fender-bed-running boards. I assume these are usually lost or damaged on old trucks but if you have some that are really rough they will work great on the "as is" driver. Thanks and way to go, keepin' the pickups rolling! P.S. I'm also interested in a specific flathead block from early pickups to rebuild. Thanks!

DetroitMotion · 09-24-2012, 08:36 PM

Any leads on 38-39 one-ton fenders or running boards?

dfran12146 · 10-04-2012, 10:58 AM

looking for 41 pickup frame....

70cougar · 11-09-2012, 09:40 AM

How about a 37 windshield frame ?

randeyc · 11-15-2012, 12:31 AM

In need of the upper and lower radiator splash pan. Let me know if you have one.

randeyc · 11-15-2012, 12:33 AM

In need of the upper and lower radiator splash pan. Let me know if you have one. Forgot to add for a 37 pickup

Roadster5040 · 11-25-2012, 08:13 AM

Looking for 35-36 pickup truck column drop complete with key 713-826-2582 Tim

KARNUTS · 12-01-2012, 06:39 PM

I have a rare 41 ford pickup radiator from the n series flat head 4 cylinder if your interested or have people looking for one
Jeff
[email protected]

borcutt · 12-11-2012, 09:17 PM

sent you an email about a grille.

russtford · 12-25-2012, 11:06 AM

Need front fenders for 35 pickup. Also grill, any front sheet metal.

vintagevolks55 · 12-25-2012, 10:30 PM

you wouldnt happen to have any complete 1940-41 trucks would ya? looking for a project, and im also a vw guy, got any vws sitting around?

thanks
danny

jvanhoover · 12-26-2012, 07:27 PM

Hey, do you have any 1935 1 1/2 ton truck parts. Looking for a steering wheel. well the whole column if you had one. Any doors for the cab? thanks

Drifter · 12-30-2012, 09:30 PM

How much for the 38 p/u grill in the picture? is the center strip on it?

[email protected] · 01-24-2013, 07:41 PM

Quote:

Originally Posted by Aircooled1

I have early 1935 through 1941 Ford 1/2 ton pickup parts available,from frames cabs fenders & beds to hoods grills & doors,banjo rear axles & transverse spring front axles to 16" wheels & early hydraulic brakes,flathead V8 motors & parts to top loader transmissions & parts,ask and I may possibly have the part you are looking for, EMAIL FOR PICTURES, located 125 miles North of Sacramento on Highway 99, email [email protected] or call 530-384-1651

am looking for a nice 35 pu grille steve

Boss1940 · 01-30-2013, 09:48 PM

I am looking for a upper rad / grille support for 1941 ford pick up. 6 cylinder. It would be the part that the hood latches down on.. Tom. 1-732-647-6128

BC Texas · 02-01-2013, 07:02 PM

Sponsored Links (Register now to hide all advertisements)

Looking for late 46 or early 47 ring and pinion set, for open drive banjo rear. 3:78 or 4:11 has the yoke, not the spline

BLACKFLAMED50 · 02-05-2013, 11:23 PM

I'm looking for a pair (or left side) hood hinges for 1938-39 Pick-up

40fordpu · 02-06-2013, 05:51 PM

How about 40 horns?

aldixie · 02-10-2013, 08:58 PM

Looking for 38 thru 41 Gas filler tube. Thanks

JLB3 · 02-21-2013, 07:53 AM

Looking for 37 Ford Pickup parts. PM or email me at JLBThreee at gmail dot com
- Grill Trim
- Hood Side and Front grill emblem
- Right side door mirror
- Running board spare tire holder

hdleaksoil · 03-11-2013, 08:30 PM

Quote:

Originally Posted by ken ct

Why some people have to bump,bump,bump constantly is beond me. Once should be enough.?????????????????? ken ct.

What does it cost for you to rebuild my 40 carb ??? thanks len

nixtochevy · 03-13-2013, 08:42 PM

i need a pass side door for my 35 pick up....i don't know early from late..can i get a picture of them?? [email protected]

Aircooled1 · 03-16-2013, 10:42 AM

Bumping to the top of the list is supposed to be allowed every 3 days according to the Ford Barn rules.....check them out yourself.....Jim A.

timlreed · 03-22-2013, 03:41 PM

If you can help me , i sure do need a pair of 1938-1939 ford pickup hood hinges . these are very hard to find . Thanks

pig boat · 05-21-2013, 10:04 AM

aircooled, i need the front grill aprons for my 1938 ford truck.. between the grill and fenders. thank you . please notify at [email protected].. Jack

V12Bill · 05-22-2013, 08:53 PM

Looking for 1938 or 39 pickup radiator stamped 81 C. [email protected]
Would like to get a shroud also , but not urgent.

colondaddyof3 · 05-31-2013, 11:26 PM

Hello I need a 1937 truck grill, rear fenders, a bench seet, a bed and more,, let me know how much for the short list,,,thanks

dinokruzordinance · 06-06-2013, 12:34 PM

Aircooled the grill and the fenders on a 1.5 1937 are larger / bigger radius. Is the cab the same as 1/2 t? Will 1/2 fenders mate to a 1.5 ton? My 1/2t has a despicable crush spot in the B pillar and I have a 1.5. Do u have that 1/2 fender still? I read roothawgs tech post but am unclear on the above

Coreyfatboy · 06-16-2013, 02:03 PM

Do you have a steering box for a 36 pick up?

gerrald meacham · 06-16-2013, 08:01 PM

need dual bottom pully for 24 bolt ,38-40 ford big truck

Cruisin40 · 06-21-2013, 03:08 PM

Hi, I need a frame, radiator and possibly a grille for a 1940 truck. If you have them, can you tell me how to go about arranging shipping? Thanks...

bpelectric · 07-31-2013, 09:52 PM

Looking for 40 or 41 pickup hood and set of front fenders

MII · 08-14-2013, 10:22 AM

I am looking for 1936 pickup inner fenders
I believe that 35,36,37 are all similar

steve benson · 09-06-2013, 10:44 AM

looking for 41 hood moldings both sides along the hood release handle.
thanks steve
[email protected]

Truckin23 · 09-06-2013, 02:08 PM

Hi looking for dash speedo 0-60 mph and gauges , steering wheel with center horn button, seat and passenger side windshield garnish I have a 1942 1 & 1/2 ton flatbed

Thanks Bob

mvonhobe · 09-27-2013, 10:45 PM

Sponsored Links (Register now to hide all advertisements)

Need the vacuum wiper linkage and tower (only driver side) for a '39 truck. Mine's a 1-1/2 ton flatbed.

Bill Pine · 11-30-2013, 08:04 PM

have front fenders hood and grill for 38 39 pickup 518 821 7123 Bill in good shape

Bacchus · 12-01-2013, 12:19 AM

Need tailgate and box sides for '40.

Front/rear bumper mounts for '40.

Glass for '40.

[email protected] · 12-31-2013, 08:31 PM

do u have 1940 ford pickup boxes in good condition

Aircooled1 · 02-02-2015, 05:10 PM

Have only a few Old Ford truck parts left for sale..... Bump...

Aircooled1 · 01-24-2017, 02:23 PM

Still have 'em ..... Bump...

Aircooled1 · 07-05-2017, 12:07 PM

Have only a few Old Ford truck parts left for sale..... Bump...

Aircooled1 · 10-15-2017, 10:51 AM

Still Have only a few Old Ford truck parts left for sale..... Bump...

Aircooled1 · 06-26-2018, 08:25 AM

Still Have only a few Old Ford truck parts left for sale..... Bump...

Aircooled1 · 12-03-2018, 01:39 PM

Still Have only a few Old Ford truck parts left for sale..... Bump...

05-21-2010, 12:45 PM	#2
howco Junior Member Join Date: May 2010 Location: South Sound, Washington Posts: 3	Re: 1935-1941 Ford Pickup Parts Hey Aircooled, looking for a 1937 Ford 1/2 ton truck grill..

05-21-2010, 04:47 PM	#3
crider Junior Member Join Date: May 2010 Posts: 16	Re: 1935-1941 Ford Pickup Parts I'm looking for a 35-36 glove box door.

05-23-2010, 09:08 AM	#4
fordzilla9 Junior Member Join Date: May 2010 Posts: 10	Re: 1935-1941 Ford Pickup Parts I am looking for a 1940-41 1/2 ton pickup hood and 2 fenders in good condition.

06-08-2010, 11:56 PM	#5
robert stafford Junior Member Join Date: May 2010 Posts: 25	Re: 1935-1941 Ford Pickup Parts I need a 35-37 pickup right front fender brace (the large one). Please advise. Thanks, Rob in WA State

06-09-2010, 07:54 AM	#6
blindmouse Member Join Date: May 2010 Posts: 44	Re: 1935-1941 Ford Pickup Parts Sponsored Links (Register now to hide all advertisements) I need grille and front fenders for 39 pu.

06-17-2010, 02:10 AM	#7
40fordman Junior Member Join Date: May 2010 Location: Parkhill,Ok (lLake Tenkiller) Posts: 23	Re: 1935-1941 Ford Pickup Parts need passenger side front fender for 40 ford pick up

07-07-2010, 06:54 PM	#8
langan Member Join Date: May 2010 Location: Sequim Posts: 64	Re: 1935-1941 Ford Pickup Parts Is this Jim? I am looking for 35-36 truck grill trim?

07-14-2010, 06:53 PM	#9
Mike in Mass Senior Member Join Date: May 2010 Location: PLYMOUTH MASS Posts: 860	Re: 1935-1941 Ford Pickup Parts HI Jim still looking for a very nice steering wheel and column drop for a 39 pic-up thanks mike p

07-21-2010, 02:52 PM	#10
s1b Senior Member Join Date: May 2010 Location: Orlando Posts: 149	Re: 1935-1941 Ford Pickup Parts Sent you a Email about backing plates.

09-20-2010, 07:52 PM	#11
jessedog Junior Member Join Date: Sep 2010 Posts: 10	Re: 1935-1941 Ford Pickup Parts I will be removing my steering wheel out of my 38 ford pu if interested in wheel and column drop with key let me know, I will be doing this starting in Nov., I have to figure out what cost to ask. Jerry

09-20-2010, 11:36 PM	#12
Burny Junior Member Join Date: May 2010 Posts: 24	Re: 1935-1941 Ford Pickup Parts Need front fender brackets for a '37- the large ones that the headlights mount on...

09-27-2010, 09:03 PM	#13
badassford Member Join Date: May 2010 Location: Grand Island, Nebraska Posts: 62	Re: 1935-1941 Ford Pickup Parts You sent pics of one cab but no price. I notice that the price listed on one web site is 650 and on another it is 550.00 What are the prices on your other 35,36 cabs?

09-27-2010, 09:04 PM	#14
badassford Member Join Date: May 2010 Location: Grand Island, Nebraska Posts: 62	Re: 1935-1941 Ford Pickup Parts my email is [email protected]

09-28-2010, 09:36 AM	#15
rustyrods Senior Member Join Date: May 2010 Posts: 260	Re: 1935-1941 Ford Pickup Parts I COULD USE A TITLE FOR ONE . PLEASE EMAIL [email protected]

09-28-2010, 11:10 AM	#16
[email protected] Junior Member Join Date: Sep 2010 Posts: 1	Re: 1935-1941 Ford Pickup Parts hi looking for 1937 pickup grill i am calling from mass. my number is 19786675343 or my e-mail is [email protected]. thank you Jim

10-05-2010, 06:38 PM	#17
Gordon Ellis Member Join Date: May 2010 Posts: 45	Re: 1935-1941 Ford Pickup Parts Am looking for a 41 Ford 1/2 ton pickup grille. Do you have one, and whats the overall condition and price? Email me at............... [email protected]

10-22-2010, 11:55 PM	#18
kiwi88 Junior Member Join Date: Oct 2010 Location: Hamilton, New Zealand Posts: 20	Re: 1935-1941 Ford Pickup Parts Hi. I'm looking for a pair of good or workable 36 rear p/u fenders plus a good deck. C

10-25-2010, 11:10 AM	#19
exoilfld Senior Member Join Date: May 2010 Location: alto, tx Posts: 145	Re: 1935-1941 Ford Pickup Parts Do you have a hood pull for a 41 truck? The little handle you pull to open the hood. My email is [email protected] Thanks

11-01-2010, 01:04 PM	#20
Bri35Ford Junior Member Join Date: Oct 2010 Location: On the North East Coast of Grimsby U.K. Posts: 18	Re: 1935-1941 Ford Pickup Parts Hi....... Im looking for a 35 Ford pk up inner grill shell, It has two crank holes pressed into it . Last edited by Bri35Ford; 12-15-2010 at 07:05 PM.

11-03-2010, 04:48 PM	#21
Burny Junior Member Join Date: May 2010 Posts: 24	Re: 1935-1941 Ford Pickup Parts Price on right rear fender for a '35-'37?

11-25-2010, 09:27 PM	#22
35 rancho Member Join Date: Sep 2010 Location: San Diego Posts: 92	Re: 1935-1941 Ford Pickup Parts I'm looking for the two oval shape doors(?) above the windshield guess they cover the hinge for the windshield.

11-26-2010, 08:05 PM	#23
bezerker999 Junior Member Join Date: Nov 2010 Location: Montana Posts: 1	Re: 1935-1941 Ford Pickup Parts I have a 1937 Ford 1.5 ton that has a 1936 radiator shell, grill and hood and I would like to find a 1937 setup.

11-27-2010, 10:42 PM	#24
Hotrodvideo Senior Member Join Date: Jul 2010 Location: Denver, CO Posts: 316	Re: 1935-1941 Ford Pickup Parts I'm still looking for a '40 thru '46 mast jacket...have one??

12-03-2010, 05:00 PM	#25
Joe/Ct Senior Member Join Date: May 2010 Location: Waterford, CT Posts: 250	Re: 1935-1941 Ford Pickup Parts I am looking for a radiator cap for a '41 (11A over G) car(?) radiator.

12-04-2010, 08:11 AM	#26
Lincoln29 Senior Member Join Date: Aug 2010 Location: Plymouth, Indiana Posts: 111	Re: 1935-1941 Ford Pickup Parts Sponsored Links (Register now to hide all advertisements) Jim: I am looking for a original gas guage for my 35 Ford pickup. Can you help, Jerry: [email protected]

12-05-2010, 09:28 PM	#27
twoboots Junior Member Join Date: Nov 2010 Posts: 3	Re: 1935-1941 Ford Pickup Parts i am looking for 6 good 20 inch 1ton bud wheels for my 1937 ford Thanks Al

12-09-2010, 01:48 PM	#28
Lincoln29 Senior Member Join Date: Aug 2010 Location: Plymouth, Indiana Posts: 111	Re: 1935-1941 Ford Pickup Parts Looking for a 35 or 36 Ford pickup Fuel Gauge. Thanks, Jerry

12-21-2010, 05:32 PM	#29
landshark Member Join Date: Sep 2010 Location: upstate NY Posts: 50	Re: 1935-1941 Ford Pickup Parts looking for a cowl vent bracket and handle for 41 ford 1/2 ton thanks landshark

12-28-2010, 10:05 PM	#30
Stillrunners Member Join Date: May 2010 Location: Dallas Posts: 62	Re: 1935-1941 Ford Pickup Parts hope to drop in....next time i'm in SAC town...

12-31-2010, 12:53 PM	#31
Cruisin40 Junior Member Join Date: Dec 2010 Location: Yorktown, Virginia Posts: 15	Re: 1935-1941 Ford Pickup Parts I am looking for a set of rear fenders for a '41 1/2-ton. If not a pair then definitely a passenger-side one.

01-07-2011, 09:42 PM	#32
2831AV8 Member Join Date: May 2010 Location: Tampa,Fl / Moultonborough, NH Posts: 32	Re: 1935-1941 Ford Pickup Parts Looking for both left and right frame center crossmembers that go between the frame rails and center crossmembers that fit 35-40 passenger or 35-41 pickup frames. Mine is a 39. [email protected] cell 603-848-6688

01-08-2011, 11:32 AM	#33
Steve Seidl Senior Member Join Date: May 2010 Location: Ham Lake,Minn Posts: 118	Re: 1935-1941 Ford Pickup Parts What is a good '35 Ford cab with good doors going for ?

01-08-2011, 10:37 PM	#34
carnutdean Junior Member Join Date: Jun 2010 Posts: 11	Re: 1935-1941 Ford Pickup Parts hi, would you happen to have a good used or new window regulator for a 1941 ford drivers door?I got a emergency handle from you a while ago.thanks. [email protected] Jonathan James

01-24-2011, 03:13 PM	#35
klicker Senior Member Join Date: Aug 2010 Location: Oregon Posts: 311	Re: 1935-1941 Ford Pickup Parts Looking for later 40s backing plates for conversion for my 39 coupe. I want to keep my wide 5 drums. Any help? Advice? [email protected]

01-28-2011, 07:33 PM	#36
djandboo Junior Member Join Date: Oct 2010 Posts: 6	Re: 1935-1941 Ford Pickup Parts Do you have any rear fenders for a 36 Ford pick-up?