Window Channels

[jack99]

I am about to replace the window channels on my 1931 slant window 160B.

Anyone done this and do you have any advice as to what I may need to do the job ?

[Charles Coe]

Here's a link to an article by Tom Endy on replacing window channels on a Victoria that may be helpful: http://www.santaanitaas.org/wp-conte...ing-_4-08_.pdf

[Tom Endy]

Charles Coe:

Thank you for posting the information, I was about to do that, but not as easily with a direct link as I don't know how to do it.

Jack99:

Keep in mind the article addresses a Model A Victoria. The article originally appeared in the Victoria Association newsletter. However the door windows on a slant window sedan are similar. The two documents referred to in the article can be obtained from the Victoria Association.

Good luck with your project.
Tom Endy

[Bill Underwood]

Here's another good article that I have been forwarding to folks thru the years.

[Tom Endy]

Charles Coe:
See if this works.

http://www.santaanitaas.org/wp-conte...ing-_4-08_.pdf

[Charles Coe]

Sponsored Links (Register now to hide all advertisements)

Works perfect.

[jack99]

Thanks so much for the information. I will tackle this in about two weeks.