3/8x3/8 jahns pistons?

[Pete]

Originally Posted by Ol' Ron

I bought a stroker kit from C&T automotive, and they user the29a floating bearings, Got 342CI, Clay smith super matchless cam and Hilbrn. Kinda wish I had it dynoed because it could lite the tires at 60 in hi, by just putting ot to the floor. First time I ever had that much power.
Gramps

I bought one of those also. The cranks were built up with spray metal instead of welding. It lasted 1 run with 100 % nitro. Turned out they didn't use the proper spray wire on the first pass.

[Ol' Ron]

I nevver had the opportunity to run this at the drags, The owner slod the engine for far less than he had invested, and we stuck a stock engine back into the car (56 HT). Don't know what happened to it. Thanks for the info Pete.
Gramps