The Ford Barn

roundbill · 08-21-2020, 02:30 PM

Hey out there, need a little help. Need a picture of the cab to chassie mount on a 36 ford tudor. just behind the doors, both mounts are rotted away. Need to fab them cant buy them. Any help will be appreciated. Thanks. Roundbill

JSeery · 08-21-2020, 02:35 PM

Have you tried the Wescott site?

http://www.wescottsauto.com/

http://www.wescottsauto.com/WebCatal...09-F-Frame.pdf

TJ · 08-22-2020, 04:18 PM

If you are talking about those rectangular outriggers on the side of the frame you use to be able to get them from Chassis Engineering. You might also try TCI in California

Krylon32 · 08-22-2020, 04:25 PM

Sponsored Links (Register now to hide all advertisements)

I see that Pete & Jake's has taken the manufacturing of the Chassis Engineering body mounts. I always used them when I was still building 35-40 customer chassis, had no problems with them.

08-21-2020, 02:30 PM	#1
roundbill Junior Member Join Date: Jun 2014 Location: NORTH CAROLINA AND FLORIDA Posts: 8	1936 ford tudor cab mount photo Hey out there, need a little help. Need a picture of the cab to chassie mount on a 36 ford tudor. just behind the doors, both mounts are rotted away. Need to fab them cant buy them. Any help will be appreciated. Thanks. Roundbill

08-21-2020, 02:35 PM	#2
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: 1936 ford tudor cab mount photo Have you tried the Wescott site? http://www.wescottsauto.com/ http://www.wescottsauto.com/WebCatal...09-F-Frame.pdf Last edited by JSeery; 08-21-2020 at 03:01 PM.

08-22-2020, 04:18 PM	#3
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,029	Re: 1936 ford tudor cab mount photo If you are talking about those rectangular outriggers on the side of the frame you use to be able to get them from Chassis Engineering. You might also try TCI in California

08-22-2020, 04:25 PM	#4
Krylon32 Senior Member Join Date: May 2010 Posts: 4,470	Re: 1936 ford tudor cab mount photo Sponsored Links (Register now to hide all advertisements) I see that Pete & Jake's has taken the manufacturing of the Chassis Engineering body mounts. I always used them when I was still building 35-40 customer chassis, had no problems with them.