The Ford Barn

freak · 05-01-2016, 02:43 PM

I need the 3 contact connector that is seemingly built in to the headlamp. The part that the harness plugs into. Does anyone know where to get one?

700rpm · 05-01-2016, 03:01 PM

Bratton's, Bert's, Snyders.

freak · 05-01-2016, 03:09 PM

Don't see them shown on any of those sites.

freak · 05-01-2016, 03:11 PM

Ohhh... nevermind... I see... it comes as a whole assembly with the lamp socket.

Mitch//pa · 05-01-2016, 03:14 PM

Like these???

Brattons has them also as do prob all the suppliers.. Under headlights

freak · 05-01-2016, 03:16 PM

Sponsored Links (Register now to hide all advertisements)

yeah see my last post.

freak · 05-01-2016, 03:35 PM

Ok... how do you get that connector out of the bottom of the headlamp?

Mitch//pa · 05-01-2016, 03:41 PM

They snap into this ferrule

freak · 05-01-2016, 03:45 PM

Pull it out with pliers?

freak · 05-01-2016, 03:59 PM

I got it out. To replace that ferrule it looks like you'd have to remove the rivets that hold the bowl to the bracket.

Drive Shaft Dave · 05-01-2016, 11:08 PM

Quote:

Originally Posted by freak

I got it out. To replace that ferrule it looks like you'd have to remove the rivets that hold the bowl to the bracket.

Yes ,you do.

Tom Wesenberg · 05-02-2016, 06:02 AM

The parts houses sell rivet/nuts, so you won't have to rivet the plate back on.

freak · 05-02-2016, 06:49 PM

Thanks everyone!

05-01-2016, 02:43 PM	#1
freak Senior Member Join Date: Sep 2013 Location: Pemberville, Ohio Posts: 456	need connector for inside headlamp I need the 3 contact connector that is seemingly built in to the headlamp. The part that the harness plugs into. Does anyone know where to get one?

05-01-2016, 03:01 PM	#2
700rpm Senior Member Join Date: May 2010 Location: Portland, Oregon Posts: 5,906	Re: need connector for inside headlamp Bratton's, Bert's, Snyders. __________________ Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole.

05-01-2016, 03:09 PM	#3
freak Senior Member Join Date: Sep 2013 Location: Pemberville, Ohio Posts: 456	Re: need connector for inside headlamp Don't see them shown on any of those sites.

05-01-2016, 03:11 PM	#4
freak Senior Member Join Date: Sep 2013 Location: Pemberville, Ohio Posts: 456	Re: need connector for inside headlamp Ohhh... nevermind... I see... it comes as a whole assembly with the lamp socket. Last edited by freak; 05-01-2016 at 03:21 PM.

05-01-2016, 03:16 PM	#6
freak Senior Member Join Date: Sep 2013 Location: Pemberville, Ohio Posts: 456	Re: need connector for inside headlamp Sponsored Links (Register now to hide all advertisements) yeah see my last post.

05-01-2016, 03:35 PM	#7
freak Senior Member Join Date: Sep 2013 Location: Pemberville, Ohio Posts: 456	Re: need connector for inside headlamp Ok... how do you get that connector out of the bottom of the headlamp?

05-01-2016, 03:45 PM	#9
freak Senior Member Join Date: Sep 2013 Location: Pemberville, Ohio Posts: 456	Re: need connector for inside headlamp Pull it out with pliers?

05-01-2016, 03:59 PM	#10
freak Senior Member Join Date: Sep 2013 Location: Pemberville, Ohio Posts: 456	Re: need connector for inside headlamp I got it out. To replace that ferrule it looks like you'd have to remove the rivets that hold the bowl to the bracket.

05-02-2016, 06:02 AM	#12
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: need connector for inside headlamp The parts houses sell rivet/nuts, so you won't have to rivet the plate back on.

05-02-2016, 06:49 PM	#13
freak Senior Member Join Date: Sep 2013 Location: Pemberville, Ohio Posts: 456	Re: need connector for inside headlamp Thanks everyone!