|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-22-2015, 03:55 PM | #1 |
Senior Member
Join Date: Sep 2013
Location: Pemberville, Ohio
Posts: 456
|
windshield frame screw removal?
On a 1930 4 door... anyone have any tips on removing the screws that hold the windshield frame together?
|
03-22-2015, 05:57 PM | #2 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: windshield frame screw removal?
i used an impact driver many times with great success.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-22-2015, 06:21 PM | #3 |
Senior Member
Join Date: May 2010
Location: Lakeville, MN
Posts: 5,164
|
Re: windshield frame screw removal?
Carefully applying some heat will work.
Rusty Nelson |
03-22-2015, 06:33 PM | #4 |
Senior Member
Join Date: Sep 2013
Location: Pemberville, Ohio
Posts: 456
|
Re: windshield frame screw removal?
|
03-22-2015, 06:39 PM | #5 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: windshield frame screw removal?
a good quality one with good bits.. mine is snap on ....... HF quality will do that
|
03-22-2015, 06:54 PM | #6 | |
Senior Member
Join Date: Sep 2013
Location: Pemberville, Ohio
Posts: 456
|
Re: windshield frame screw removal?
Sponsored Links (Register now to hide all advertisements)
Quote:
This one is really old and probably chinese. I've reground the tip and got two out. Might soak the other two with pb blaster overnight. Those impact drivers are a godsend. |
|
03-22-2015, 07:05 PM | #7 |
Senior Member
Join Date: Sep 2013
Location: Pemberville, Ohio
Posts: 456
|
Re: windshield frame screw removal?
Last one broke off. Oh well. I can fix it. What do those two screws at the top on the outside of the frame do?
|
03-22-2015, 07:42 PM | #8 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: windshield frame screw removal?
those 2 little screws in the front ... hmm i think they screwed into the adjoining frame that is slid in ..
i once submerged the frame corners in evaporust..that worked good also |
03-23-2015, 02:53 AM | #9 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: windshield frame screw removal?
the two screws on the front are screwed into a nut on the backside. the nuts is hidden under the windshield seal. unless you are trying to save the paint heat the nuts up and the screw will come out most of the time. on the two on each side of the frame I heat them up three or four time before I try removing them. I also use Windex for penetration and cooling the screws.
|
03-23-2015, 09:53 AM | #10 |
Senior Member
Join Date: May 2010
Location: Princeton, NJ
Posts: 965
|
Re: windshield frame screw removal?
Heat! As in actual red-hot heat.
Those screws on my windshield came out rather easily after using a small acetylene torch on them. Probably one of those MAPP torches would also work. And of course wait until they cool off before trying to unscrew them. The same strategy got all 15/16 of my door hinge screws out. (The last one broke and I had to carefully drill it out, but the threads in the body were unharmed.) Doug
__________________
My '31 S/W sedan project:http://31ford.dougbraun.com My restoration diary: http://dougbraun.com/blog |
03-23-2015, 08:53 PM | #11 |
Senior Member
Join Date: Sep 2013
Location: Pemberville, Ohio
Posts: 456
|
Re: windshield frame screw removal?
No heat!!! Trying to save the paint!
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|