05-05-2013, 02:45 PM | #1 |
Member
Join Date: May 2010
Location: Arlington Hts, IL
Posts: 81
|
34 p/u grill
Hi,
Actually two questions, first, Is the small hole in the top of the shroud right below the radiator fill hole supposed to be round or some other shape. See the picture. Second, are all four radiator to shroud brackets identical. I only have one but can make more if they are the same. Thanks, Al K. Last edited by Al K.; 05-05-2013 at 05:53 PM. |
05-05-2013, 03:26 PM | #2 |
Senior Member
|
Re: 34 P/U shroud
The hole in the top of the shell is a stamped horse shoe shape with a 3/16 hole in the bottom. The brackets are not matched there is one for the top and one for the bottom are,
|
Sponsored Links (Register now to hide all advertisements) |
|
05-05-2013, 04:48 PM | #3 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: 34 P/U shroud
What you are referring to is more correctly called a grill. A shroud generally applies to a metal piece that fits on the back side of the radiator and has a large hole in the center, the same size of the fan blade, the purpose being to direct all of the air the fan pulls through the radiator is directed to the center of the radiator for optimum air flow and cooling. I do not believe a shroud would be original equipment for a 34 Ford.
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
05-06-2013, 06:57 AM | #4 |
Senior Member
Join Date: May 2010
Location: Lake City Mi.
Posts: 807
|
Re: 34 p/u grill
Flatheadted is correct the upper & lower are different as to the other ? here is a picture of the finished shell.
|
05-06-2013, 12:22 PM | #5 |
Member
Join Date: May 2010
Location: Arlington Hts, IL
Posts: 81
|
Re: 34 p/u grill
Thank you for all the replies and corrections, wink. I would assume then that the hole that I am concerned about has some sort of fastening device in it to secure the emblem.
Can someone provide a sketch or measurements for the upper bracket? Thanks, Al K |
05-06-2013, 01:08 PM | #6 |
Senior Member
Join Date: May 2010
Location: Wichita, KS
Posts: 210
|
Re: 34 p/u grill
Sponsored Links (Register now to hide all advertisements)
|
05-06-2013, 04:45 PM | #7 |
Senior Member
|
Re: 34 p/u grill
A screw goes through into the radiator ,check a emblem
|
05-06-2013, 06:02 PM | #8 |
Member
Join Date: May 2010
Location: Arlington Hts, IL
Posts: 81
|
Re: 34 p/u grill
Thanks for the tips. Will search for them.
Thanks for the screw info. Not having the emblem yet made it difficult to picture why the hole was there. Al K. |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|