I seen something truly amazing.

[Flathead man2]

Flathead speed and machine has an EFI system for the Flathead, I was flabbergasted. I had to look really hard a couple times in the video to see the system, It's truly amazing cause if ya want to, just take the injection part off and put the carb back on your throttle body. I was like WOW I CAN'T BELEAVE IT. I also seen on another site, Demon carburetor CO has they're 98 series for the Flathead. It's amazing sure but I'm gonna stay traditional.

First I gotta look at the engine later this month and see if it's the right one. 276 8AB. I am gonna run carbs though. I will admit I'm stuck on weather to run dual 81's or a 4bbl. This is after I get the engine and see what it needs of course.

[ken ct]

Forget the Demon carb. ken ct.

[Flathead man2]

I was only sayin that cause I was thinking I wasnt gonna do it, it was only to see if you guys knew it was out there. I'm gonna run carbs, 81's probably.

[TonyM]

Originally Posted by Flathead man2

I also seen on another site, Demon carburetor CO has they're 98 series for the Flathead.

First I gotta look at the engine later this month and see if it's the right one. 276 8AB. .

The 8BA engine is 239 cubic inches, not 276.

The demon carb has been out for a while.

[Flathead man2]

witch is the 276? 255? I have the flathead v8 site up now, but cant find a straight answer.

[TonyM]

Sponsored Links (Register now to hide all advertisements)

Try this:

http://www.vanpeltsales.com/FH_web/f...0to125late.htm

Not sure where the confusion is, but I have an idea.

[Flathead man2]

The one I had pulled up didnt say this CID is this engine. thats why I asked. What year is the 276, and what CID says it is a 276? All I'm finding is 255 engines.

[Al K.]

Hi,
Stock Ford 239, stock late Mercury 255 (4" stroke, bore same).
Anything else has been bored and/or stroked. Don't confuse 337EQ truckk as same engine. Al Kk.

[Mike51Merc]

JD,
I've been watching your posts about your project. It's great that you've got the fever to build a cool project, however I respectfully suggest you slow down and BREATHE. To me, it looks like you're running around with your hair on fire trying to make a list of all the best stuff to put into your project, but you're not looking at the practical reality of making it REAL.

This is going to be a long term commitment. Most guys spend years building a project and many guys will tear it apart and re-do things as they go along.

A lot of the stuff you've been talking about costs a pretty penny. If you make a list and add it up, you're talking about a very expensive project and you have to ask yourself if that is reasonable under you own situation.

You can get a ton of pleasure from a less-than-perfect car that you fix up a little at a time. That's how most guys here do it, unless they have a fat checkbook to write fat checks on a new toy. Not that there is anything wrong with expensive toys.

[Al K.]

Somehow this got on the wrong post, and I can't find the right one. Oh well I guess I'll just go back to sleep. Al K.

[Al K.]

I was right and disn't know it. Snore.

[Flathead man2]

Originally Posted by Mike51Merc

JD,
I've been watching your posts about your project. It's great that you've got the fever to build a cool project, however I respectfully suggest you slow down and BREATHE. To me, it looks like you're running around with your hair on fire trying to make a list of all the best stuff to put into your project, but you're not looking at the practical reality of making it REAL.

This is going to be a long term commitment. Most guys spend years building a project and many guys will tear it apart and re-do things as they go along.

A lot of the stuff you've been talking about costs a pretty penny. If you make a list and add it up, you're talking about a very expensive project and you have to ask yourself if that is reasonable under you own situation.

You can get a ton of pleasure from a less-than-perfect car that you fix up a little at a time. That's how most guys here do it, unless they have a fat checkbook to write fat checks on a new toy. Not that there is anything wrong with expensive toys.

Your right I'll step back and make a list.

[Max41]

Wow.........

[Mike in AZ]

and re-read earlier posts.....the 276 question was answered in one of your earlier threads, etc.....slow down, figure out what your budget is and go from there....you've talked about a Rod place before...are you planning on getting your dream built there??...Mike

[Tim Ayers]

To be clear, a 276" motor is a block that has been puched out .125" ans uses a 4" stroke crank. No Ford flathead came from the factory as a 276" motor.

[Gary in La.]

I would suggest that you first save your pennies and invest in some good books about old Fords and flathead V-8 engines. Then you need to sit down and spend more quality time reading them rather than just pounding keys to be heard. It is obvious in your seemingly endless postings that you are not familiar with Ford V-8 flatheads. Most of your posts seem to lend themselves more towards the HAMB rather than towards preserving as they were produced. Only observing and offering some constructive criticism.

[Kahuna]

Flathead man2
Don't let anyone here get you down and don't lose that enthusiasm.
You are going to do just fine

[mrtexas]

I am planning on putting a throttle body FI on my 37 v8, essentially an electronic carburetor. This is when I get a MPFI for my 63 corvette 327 and take off the Affordable TBFI. But then again I like to modify my old Fords....

[TonyM]

Originally Posted by Gary in La.

Most of your posts seem to lend themselves more towards the HAMB rather than towards preserving as they were produced. Only observing and offering some constructive criticism.

Good Advice, J.D. you might want to try H.A.M.B. too.

It might be good to go over there too and get H.A.M.B. member's opinion.

[Tim Ayers]

Originally Posted by Kahuna

Flathead man2
Don't let anyone here get you down and don't lose that enthusiasm.
You are going to do just fine

I would agree with Kahuna's post. I would just add don't spend your money yet. Try to get a better idea on what exactly you want and then go from there.

You'd be surprised the deals you can get on here, the HAMB, and even EBay. What helps is you know what you are looking for and can pull the trigger on a good deal when you come across it.

Best of luck and hang in there.