Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-09-2014, 08:36 PM   #1
lesbliss
Member
 
Join Date: May 2010
Location: Henderson,NV
Posts: 56
Default No compression

I've had a srange thing happen to my stock 51 Mercury with merc-o-matic. It has been driven very litle for the last 8 months. Took it out of storage and drove about 30 miles on the freeway. Ran ok but stalled in traffic when starting from a stop. Worked on reposistioning the the electric fuel pump to tuck it up further in frame. Noticed a slight tick from the valves so put 8oz of marvel mystery oil and drove around
or a while.
Six hours later went to start her up and no start. Turned out I had zero compression in all cylinders. Pulled the heads and found three stuck valves. I haved pulled the valves and they are not pitted or burnt.

My questions is has any one ever had compresion all all cylinders fail so suddenly like that and what is likely cause?

Les Bliss
lesbliss is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:20 AM.