|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-28-2012, 08:04 AM | #1 |
Senior Member
Join Date: May 2010
Location: near Hershey, PA
Posts: 875
|
Model-A coupe body line?
If its not too much trouble... anyone with a 28/29 and/or a 30/31 coupe...
Would you mind measuring the width of the body line bead on the quarter panel for me? We recently bought an old racecar thats made from a cut down coupe of some sort... and I'm trying to figure out what the body parts are from. The roof section I am pretty sure if model-A as the lip for the insert is still present... but the quarters were cut away only leaving a short sectin of the body line to go by, aside from the old photos...none of the giveaway body lines at the bottom edge of the roof as it was replaced with flat sheet metal.... The body line that I have looks too small to me to be a Ford... but figured measurements off the 2 styles of coupes could confirm this... thank you for any and all help Zach
__________________
-WANTED-
Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads |
09-28-2012, 08:40 AM | #2 |
BANNED
Join Date: May 2010
Location: Gothenburg Nebraska Just off I-80
Posts: 4,893
|
Re: Model-A coupe body line?
I am not going to be in the shop until this afternoon, but the 28-29 coupe belt line is narrow, but widens some as it gets forward toward the door. I have no clue why anyone ripped this quarter like this, but atleast they saved the ripped off piece, so I think with a patch panel at the bottom and a flat piece of sheetmetal in the middel I can still save this one, but it will be some work. Rod
__________________
Do the RIGHT thing - Support the H.A.M.B. Alliance!!!! |
Sponsored Links (Register now to hide all advertisements) |
|
09-28-2012, 08:57 AM | #3 |
Senior Member
Join Date: May 2010
Location: near Hershey, PA
Posts: 875
|
Re: Model-A coupe body line?
Thanks Rowdy... looks about the same as a roadster....
Someone just measured a 30 coupe for me to be 3/4" I'm guessing the 28/9 is similar judging by your photo and my memory.... while the piece I have is only about 1/2" on the racecar body the car only had the back bit of it that curves down...maybe 18" long horizontally... this is a cut down "bug" racecar that was flathead powered in the 1960's thanks alot! Zach
__________________
-WANTED-
Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads |
09-28-2012, 09:33 AM | #4 |
Junior Member
Join Date: Sep 2012
Location: Sapulpa,Oklahoma
Posts: 16
|
Re: Model-A coupe body line?
Post some pics of it if you can. I love old race cars and hotrods.Very interesting
|
09-28-2012, 09:45 AM | #5 |
Senior Member
Join Date: May 2010
Location: Ridgefield, Ct
Posts: 3,441
|
Re: Model-A coupe body line?
X2 on the photos, old Pennsylvania Race Cars are always good to look at. Bob
__________________
They don't have to run to be enjoyed. I'm here to enjoy the hobby, and enjoy the cars no matter what they look like. Most of the worlds problems are electrical. |
09-28-2012, 10:14 AM | #6 |
Senior Member
Join Date: May 2010
Location: near Hershey, PA
Posts: 875
|
Re: Model-A coupe body line?
Sponsored Links (Register now to hide all advertisements)
Zach
__________________
-WANTED-
Pre-War Speed Equipment Davies or Morrison Intake Manifold 77-6050B, 81AS - 81SB - 99AS - 99SB 19AS cylinder heads |
|
|
Sponsored Links (Register now to hide all advertisements) |
|