The Ford Barn

Burgamot · 07-13-2020, 01:08 PM

several days ago i asked for help on my leaking zenith crab and tried the suggestion that members sent in without sucess. in my original post i mentioned that the new valve body i put in was lower than what was in there. it took 2 washers to get it to the5/8 inch level but still leaked. When i purchased the valve body i also bought the shim washers so i put in a thin(grey)washer and that stopped the leaking. i was surprised that one thin washer would make that much difference. thanks for everyones help.

07-13-2020, 01:08 PM	#1
Burgamot Member Join Date: Jul 2014 Posts: 40	update on leaking zenith carb several days ago i asked for help on my leaking zenith crab and tried the suggestion that members sent in without sucess. in my original post i mentioned that the new valve body i put in was lower than what was in there. it took 2 washers to get it to the5/8 inch level but still leaked. When i purchased the valve body i also bought the shim washers so i put in a thin(grey)washer and that stopped the leaking. i was surprised that one thin washer would make that much difference. thanks for everyones help.