The Ford Barn

A-Man · 06-08-2010, 07:56 AM

Attempted to start the rebuilt engine last night. Have installed the front motor mount set with the front motor mount yoke. When the cranksahft pulley turns, it rubs on the yoke. I am puzzled why it is doing this, and how to fix the problem.

Farrell In Vancouver · 06-08-2010, 08:08 AM

Have you got the yoke on backwards?

V4F · 06-08-2010, 08:35 AM

you need to wait untill the motor is in b 4 putting on the front mount , imho . backwards or bent is all i can think of also ............... steve

Tom Wesenberg · 06-08-2010, 08:38 AM

Sponsored Links (Register now to hide all advertisements)

Could it be a bad repro crank pulley with a flange that goes back too far?

06-08-2010, 08:08 AM	#2
Farrell In Vancouver Senior Member Join Date: May 2010 Location: Pitt Meadows BC Posts: 1,003	Re: Front Motor Mount Yoke Have you got the yoke on backwards?

06-08-2010, 08:35 AM	#3
V4F Senior Member Join Date: May 2010 Location: ca. Posts: 2,522	Re: Front Motor Mount Yoke you need to wait untill the motor is in b 4 putting on the front mount , imho . backwards or bent is all i can think of also ............... steve __________________ V4f

06-08-2010, 08:38 AM	#4
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Front Motor Mount Yoke Sponsored Links (Register now to hide all advertisements) Could it be a bad repro crank pulley with a flange that goes back too far?