The Ford Barn

Stuart · 06-04-2010, 06:07 PM

I have removed very old non-Ford glass mountings. I have rebuilt the regulator. I have installed the felt glass guides. How do I install the glass and regulator?

Do I need to remove one of the guides and install glass and slide together?

DeBordEngineMan · 06-06-2010, 10:05 PM

Sponsored Links (Register now to hide all advertisements)

Hello Stuart I had the same problem I am new to the hobby and could not get an answer on this topic this is how I got my glass in... put only one side of felt channels in then put my glass in window channel on one side then slid other channel down into the window area with some slick window cleaner on channels and it slid down between glass and opening takes some time!!!! also had to use original felt channel on one side of each window in back quarter glass repo channels were to big as far as the regulator they fit in with 3 screws I put them in before glass is put in hope this helps.

06-04-2010, 06:07 PM	#1
Stuart Junior Member Join Date: Jun 2010 Location: California Posts: 1	Glass installation in Tudor rear side window I have removed very old non-Ford glass mountings. I have rebuilt the regulator. I have installed the felt glass guides. How do I install the glass and regulator? Do I need to remove one of the guides and install glass and slide together? Last edited by Stuart; 06-04-2010 at 06:09 PM. Reason: left out part of question and spell correction

06-06-2010, 10:05 PM	#2
DeBordEngineMan Senior Member Join Date: May 2010 Location: Church Hill TN Posts: 190	Re: Glass installation in Tudor rear side window Sponsored Links (Register now to hide all advertisements) Hello Stuart I had the same problem I am new to the hobby and could not get an answer on this topic this is how I got my glass in... put only one side of felt channels in then put my glass in window channel on one side then slid other channel down into the window area with some slick window cleaner on channels and it slid down between glass and opening takes some time!!!! also had to use original felt channel on one side of each window in back quarter glass repo channels were to big as far as the regulator they fit in with 3 screws I put them in before glass is put in hope this helps.