|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-03-2020, 04:41 PM | #21 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,860
|
Re: Piston to Head Clearance Input
I made a system to move the spark plug in a casr iron 8ba head. Unfortunately it's rather complicated, and not a consumer product. At present I'm not sure it will work. However, if it does you could do this to a pair of EAB heads, angle mill them .070" and have a combustion chamber around 60cc alot cheaper that any aftermarket head. At 87 I work in my shop trying to profect the perfect flathead. Maybe non of this will work, but it's agood reason to get up in the morning. Before they throe dirt on ya.
Gramps. |
11-03-2020, 07:10 PM | #22 | |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,068
|
Re: Piston to Head Clearance Input
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
11-03-2020, 07:40 PM | #23 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,630
|
Re: Piston to Head Clearance Input
Ron.....Do you have any pictures of what you did to the 8BA head???.....Thanks......Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
11-03-2020, 09:26 PM | #24 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,860
|
Re: Piston to Head Clearance Input
Yes, I'm working on a "How To", But I'm all rapped up im this roadster build and the 258 Projects. I'll put something together and maybe some of you fellows can pick it up. Also I have a way to measure the CR of an engine, accurate to the third decimal point.
I should post allot of things, burt these computers Bafacate me and I have to ua anagnafier to write this sh*t. Gramps |
11-04-2020, 10:45 AM | #25 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,630
|
Re: Piston to Head Clearance Input
Ya.... I get bafacated too!!.....putting the car together is easier than writing about it..... Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
|
|
Sponsored Links (Register now to hide all advertisements) |
|