The Ford Barn

mizzougas · 07-14-2014, 11:59 PM

I got a rear fender for my 31 sedan that was listed as a 30-31 fender. I t doesn't apper to be quite as tall as my old ones and where it attaches to the running board has a ridge about 2 inches from the bottom that is not as flat as my old one. Could this be a 28 -29 fender or something else. Are the differences obvious between the 28-29 and the 30-31? It looks the same other than the differences I mentioned. One other thing I fogot to mention, the curved area where the splash apron attaches is not as wide and the radius of the curve is slightly angle versus a nearly 90 degree curve as my old fenders

Mike V. Florida · 07-15-2014, 12:39 AM

Notice the "notched" area;

1928-29 fender;

1930-31 fender;

Ed Saniewski · 07-15-2014, 06:05 AM

Is your car a slant windshield sedan? Or is it a 1930 sedan. There is a difference between the two fenders. Ed Saniewski

Terry,NJ · 07-15-2014, 06:52 AM

It sounds like you've got a 28/29 fender. I did the same thing. Anybody need a pretty good 28/29 sedan fender, reasonable?
Terry

mizzougas · 07-15-2014, 09:06 AM

Sponsored Links (Register now to hide all advertisements)

Thanks for the replys. Notched area looks like the 29 fender shown. Wastde time sandblasting that one.

07-14-2014, 11:59 PM	#1
mizzougas Member Join Date: Mar 2014 Posts: 45	Sedan rear fenders I got a rear fender for my 31 sedan that was listed as a 30-31 fender. I t doesn't apper to be quite as tall as my old ones and where it attaches to the running board has a ridge about 2 inches from the bottom that is not as flat as my old one. Could this be a 28 -29 fender or something else. Are the differences obvious between the 28-29 and the 30-31? It looks the same other than the differences I mentioned. One other thing I fogot to mention, the curved area where the splash apron attaches is not as wide and the radius of the curve is slightly angle versus a nearly 90 degree curve as my old fenders Last edited by mizzougas; 07-15-2014 at 12:07 AM. Reason: added to desciption

07-15-2014, 12:39 AM	#2
Mike V. Florida Senior Member Join Date: May 2010 Location: South Florida Posts: 14,054	Re: Sedan rear fenders Notice the "notched" area; 1928-29 fender; 1930-31 fender; __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II

07-15-2014, 06:05 AM	#3
Ed Saniewski Senior Member Join Date: May 2010 Location: Denville NJ Posts: 964	Re: Sedan rear fenders Is your car a slant windshield sedan? Or is it a 1930 sedan. There is a difference between the two fenders. Ed Saniewski __________________ Model A Ford Club of New Jersey http://www.mafcnj.org Model A Pick Up Owners and Enthusiasts http://www.fordbarn.com/forum/group.php?groupid=5

07-15-2014, 06:52 AM	#4
Terry,NJ Senior Member Join Date: Nov 2013 Location: Northern Bucks Co. Pa Posts: 632	Re: Sedan rear fenders It sounds like you've got a 28/29 fender. I did the same thing. Anybody need a pretty good 28/29 sedan fender, reasonable? Terry

07-15-2014, 09:06 AM	#5
mizzougas Member Join Date: Mar 2014 Posts: 45	Re: Sedan rear fenders Sponsored Links (Register now to hide all advertisements) Thanks for the replys. Notched area looks like the 29 fender shown. Wastde time sandblasting that one.