The Ford Barn

1928 Sport Coupe · 03-26-2023, 01:18 AM

I have been reading the threads on brake improvement for Model A Ford's. I have not seen much about the Floater kits available from the vendors.
Are the floater kits of any help? If so are they worth the cost?
I saw on the thread about brake drums and Hydraulic conversion where nkaminar had talked about using the rear levers on the front. I thought about trying that. But still was thinking about the floaters. Does anyone have instructions on installing the floaters? I just do not understand how they work.
Is the floaters for just the front or are they for all four brakes?
Thanks in advance.

Bruce of MN · 03-26-2023, 05:06 AM

Have you looked here: http://flatheadted.com/

jack wingard · 03-26-2023, 06:19 AM

the biggest improvement you can make is cast iron drums

TomInCologne · 03-26-2023, 09:13 AM

Quote:

Originally Posted by jack wingard

the biggest improvement you can make is cast iron drums

correct! i got my Margarethe from the Netherlands (no hills) and where i live we do have some hills, not the Alps but nethertheless. I threw out the old tine drums and swapped them against cast iron drums with new brake shoes, just the front, with brake equalizers. Totally different car. Now i can brake a second and third time going downhill whereas before the second trial always resulted in additional braking with the emergency brake.

Next winter i will also swap the rear drum brakes, but that's not a high priority. I don't need more capability in the brakes...

Shiloh · 03-26-2023, 09:32 AM

Wow! Just came to the Barn to ask the same question! I look forward to the responses. I ordered some floater for the front brakes from Mikes last night because they were really affordable. But one thing a person should not skimp on is stopping power especially in todays traffic. I’ve been eyeing the flat head Teds.

Dick Carne · 03-26-2023, 11:02 AM

Sponsored Links (Register now to hide all advertisements)

I am of the impression that you will find both good and bad reviews on Flat Head Ted's. I installed them on our Town Sedan several years back when re-doing the braking system, and I struggle now with the brakes locking up when I go to back up after having applied the brakes (I always have to go forward slightly in order to release them). I have a friend who has commented that he had had the same experiences, and removed that set-up and returned to the original linkages. I am considering doing the same on this car as well. By the way, just as an FYI when considering whether other factors might be involved, when we did the brakes on my car, I replaced all bushings, rollers, shafts, cast iron brake drums, etc. I have not been able to determine any significant difference between that car and our other Model A's that do not have the Flat Head Ted's set-ups. Good luck whatever direction you decide to go.

1928 Sport Coupe · 03-26-2023, 11:27 AM

Quote:

Originally Posted by Bruce of MN

Have you looked here: http://flatheadted.com/

I will take a look at the web site. Thanks

nkaminar · 03-26-2023, 02:03 PM

The FHT floaters are worth it. Better stopping with less pedal pressure. But they have to be installed correctly and the brakes have to be in A1 shape to begin with.

Synchro909 · 03-26-2023, 04:51 PM

IMO, the main problem with the brakes on the Model A is the strong bias towards the rear. To bring that nearer the correct (by today's standards) 60/40 towards the front, I have left things as they are at the back but put cast drums with riveted woven linings on the front along with that floating pin conversion. That improved things out of sight but in a moment's inspiration, I looked at the length of the front and rear actuating levers and immediately saw why there is the bias. My answer was to graft a pair of rear actuating levers onto the front. It took a bit of machining and fiddling but now, my brakes are about as good as is possible with such narrow tyres.

eagle · 03-26-2023, 05:36 PM

My A has original everything except drums. Stops very well, and all wheels lock up at about the same time. Not sure how that can be improved? Yes, every few years it needs a little adjustment, not a big job. My other old cars are hydraulic, its a constant struggle to get them working after sitting the winter. Maybe in a dry, temporate environment it'd be different but NOT here. As to the original posters questions, I'd say go with the new drums, fix your brakes to new specs, and drive it.

nkaminar · 03-26-2023, 07:26 PM

Maybe Eagle has his brakes adjusted to put more braking on the front. Backing off the rears one or two notches may do the trick.

Eagle: in your juice brakes, what fluid are you using. I understand DOT 5 does not pick up moisture, or is it synthetic brake fluid?

I put the longer levers on the front of my car after Synchro let his secrete out.

mhsprecher · 03-26-2023, 08:42 PM

Wouldn't adjusting the brakes with more bias towards the front be another alternative, or adjusting the brakes so they all have the same amount of drag? The Ford shop bulletin and Les Andrews' approach is to start the rear brakes engaging first. Ideally, you don't want the fronts to lock up so that you maintain steering in the case of a panic stop.

My town sedan has cast iron drums and stops great. My roadster still has steel drums and stops okay given that I know their limitations, but I plan to install cast iron drums all the way around on it in the next couple of weeks. I know some people only install cast iron drums on the front, but it doesn't make much sense to me.

Keith True · 03-26-2023, 09:31 PM

The bias is created by the linkage geometry,not adjustment.You can get to the more braking on the front by adjusting,but you are really just under-adjusting the rears.I've seen two instances where the Teds floaters were a problem,and one turned out to be worn adjuster housings.I didn't find the problem,another mechanic friend did.The other time I did find the problem.I adjusted the brakes as they were supposed to be done,and the problem went away.The owner had been using that board,and it is just too much of an arbitrary tool that makes no allowances for uneven wear.

1928 Sport Coupe · 03-26-2023, 11:41 PM

I looked at Flathead Ted's website and tried to read about the different kits. I am still thinking on it.
Another question I have. Which lining is better the molded or the woven? I do not tour with the car, i just drive it for pleasure. Probably no more than 40 miles from home.
I think I will rebuild the brakes back to new stock condition plus the new cast drums. Of course that means new bushings, brake rods (mine have been bent to adjust in the past), and anything that is worn or broken and beyond repair. I may also try the rear levers on the front.
I want to have the best brakes I can without changing the mechanical brakes to Hydraulic. I want the car to look stock.
Thanks again.

Synchro909 · 03-27-2023, 12:08 AM

Quote:

Originally Posted by 1928 Sport Coupe

I looked at Flathead Ted's website and tried to read about the different kits. I am still thinking on it.
Another question I have. Which lining is better the molded or the woven? I do not tour with the car, i just drive it for pleasure. Probably no more than 40 miles from home.
I think I will rebuild the brakes back to new stock condition plus the new cast drums. Of course that means new bushings, brake rods (mine have been bent to adjust in the past), and anything that is worn or broken and beyond repair. I may also try the rear levers on the front.
I want to have the best brakes I can without changing the mechanical brakes to Hydraulic. I want the car to look stock.
Thanks again.

Woven!

updraught · 03-27-2023, 05:37 AM

https://youtu.be/lcJ5LUbmro0

https://youtu.be/2EjRe411l3M

You'll need to watch both.

You can get shoes from Randy that are matched to the drum.
I was told in my youth, linings needs to be soft. Use hard at your own peril.

BIG KEV · 03-27-2023, 06:57 AM

The real brake upgrade is the 1932 and up brakes. I swapped my fronts to the 32 brakes and the difference is hands down amazing.

The floaters do help either these or the stocks for sure... Also ditch stamped steel drums indefinitely.

BIG KEV · 03-27-2023, 07:04 AM

Few pics of the upgrade...

whirnot · 04-03-2023, 08:37 PM

Quote:

Originally Posted by 1928 Sport Coupe

I looked at Flathead Ted's website and tried to read about the different kits. I am still thinking on it.
Another question I have. Which lining is better the molded or the woven? I do not tour with the car, i just drive it for pleasure. Probably no more than 40 miles from home.
I think I will rebuild the brakes back to new stock condition plus the new cast drums. Of course that means new bushings, brake rods (mine have been bent to adjust in the past), and anything that is worn or broken and beyond repair. I may also try the rear levers on the front.
I want to have the best brakes I can without changing the mechanical brakes to Hydraulic. I want the car to look stock.
Thanks again.

I have all three types of lining, The original style woven, the soft Molded and the soft Woven that I got from Berts.

The original work great but are too "grabby" and noisy. The soft molded work quite well. But in my experience the soft Woven work the best, even though I have them on the heaviest car.

cas3 · 04-04-2023, 10:38 AM

I'm with Big Kev, I put 35 brakes on front of my coupe this winter...What a difference !

03-26-2023, 01:18 AM	#1
1928 Sport Coupe Member Join Date: May 2022 Location: Ohio Posts: 41	Brake improvement for Model A's I have been reading the threads on brake improvement for Model A Ford's. I have not seen much about the Floater kits available from the vendors. Are the floater kits of any help? If so are they worth the cost? I saw on the thread about brake drums and Hydraulic conversion where nkaminar had talked about using the rear levers on the front. I thought about trying that. But still was thinking about the floaters. Does anyone have instructions on installing the floaters? I just do not understand how they work. Is the floaters for just the front or are they for all four brakes? Thanks in advance.

03-26-2023, 05:06 AM	#2
Bruce of MN Senior Member Join Date: May 2010 Location: VA Posts: 1,198	Re: Brake improvement for Model A's Have you looked here: http://flatheadted.com/

03-26-2023, 06:19 AM	#3
jack wingard Senior Member Join Date: Oct 2019 Location: Stoneboro PA Posts: 100	Re: Brake improvement for Model A's the biggest improvement you can make is cast iron drums

03-26-2023, 09:32 AM	#5
Shiloh Member Join Date: Sep 2020 Location: Lowell, Arkansas Posts: 35	Re: Brake improvement for Model A's Wow! Just came to the Barn to ask the same question! I look forward to the responses. I ordered some floater for the front brakes from Mikes last night because they were really affordable. But one thing a person should not skimp on is stopping power especially in todays traffic. I’ve been eyeing the flat head Teds.

03-26-2023, 11:02 AM	#6
Dick Carne Senior Member Join Date: May 2010 Location: Fayetteville, Georgia Posts: 459	Re: Brake improvement for Model A's Sponsored Links (Register now to hide all advertisements) I am of the impression that you will find both good and bad reviews on Flat Head Ted's. I installed them on our Town Sedan several years back when re-doing the braking system, and I struggle now with the brakes locking up when I go to back up after having applied the brakes (I always have to go forward slightly in order to release them). I have a friend who has commented that he had had the same experiences, and removed that set-up and returned to the original linkages. I am considering doing the same on this car as well. By the way, just as an FYI when considering whether other factors might be involved, when we did the brakes on my car, I replaced all bushings, rollers, shafts, cast iron brake drums, etc. I have not been able to determine any significant difference between that car and our other Model A's that do not have the Flat Head Ted's set-ups. Good luck whatever direction you decide to go.

03-26-2023, 02:03 PM	#8
nkaminar Senior Member Join Date: Jan 2012 Location: Western North Carolina Posts: 2,934	Re: Brake improvement for Model A's The FHT floaters are worth it. Better stopping with less pedal pressure. But they have to be installed correctly and the brakes have to be in A1 shape to begin with. __________________ A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past.

03-26-2023, 04:51 PM	#9
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,025	Re: Brake improvement for Model A's IMO, the main problem with the brakes on the Model A is the strong bias towards the rear. To bring that nearer the correct (by today's standards) 60/40 towards the front, I have left things as they are at the back but put cast drums with riveted woven linings on the front along with that floating pin conversion. That improved things out of sight but in a moment's inspiration, I looked at the length of the front and rear actuating levers and immediately saw why there is the bias. My answer was to graft a pair of rear actuating levers onto the front. It took a bit of machining and fiddling but now, my brakes are about as good as is possible with such narrow tyres. __________________ Growing old is inevitable. Growing up is optional.

03-26-2023, 05:36 PM	#10
eagle Senior Member Join Date: Aug 2011 Location: Eagle Bend, MN Posts: 1,985	Re: Brake improvement for Model A's My A has original everything except drums. Stops very well, and all wheels lock up at about the same time. Not sure how that can be improved? Yes, every few years it needs a little adjustment, not a big job. My other old cars are hydraulic, its a constant struggle to get them working after sitting the winter. Maybe in a dry, temporate environment it'd be different but NOT here. As to the original posters questions, I'd say go with the new drums, fix your brakes to new specs, and drive it. __________________ "There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."

03-26-2023, 07:26 PM	#11
nkaminar Senior Member Join Date: Jan 2012 Location: Western North Carolina Posts: 2,934	Re: Brake improvement for Model A's Maybe Eagle has his brakes adjusted to put more braking on the front. Backing off the rears one or two notches may do the trick. Eagle: in your juice brakes, what fluid are you using. I understand DOT 5 does not pick up moisture, or is it synthetic brake fluid? I put the longer levers on the front of my car after Synchro let his secrete out. __________________ A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past.

03-26-2023, 08:42 PM	#12
mhsprecher Senior Member Join Date: Aug 2012 Location: Takoma Park, MD Posts: 2,689	Re: Brake improvement for Model A's Wouldn't adjusting the brakes with more bias towards the front be another alternative, or adjusting the brakes so they all have the same amount of drag? The Ford shop bulletin and Les Andrews' approach is to start the rear brakes engaging first. Ideally, you don't want the fronts to lock up so that you maintain steering in the case of a panic stop. My town sedan has cast iron drums and stops great. My roadster still has steel drums and stops okay given that I know their limitations, but I plan to install cast iron drums all the way around on it in the next couple of weeks. I know some people only install cast iron drums on the front, but it doesn't make much sense to me. __________________ 1924 Model T Coupe 1928 Model A Roadster 1930 Model A Town Sedan 1939 Deluxe Fordor 1945 pickup 1951 Custom convertible

03-26-2023, 09:31 PM	#13
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 2,808	Re: Brake improvement for Model A's The bias is created by the linkage geometry,not adjustment.You can get to the more braking on the front by adjusting,but you are really just under-adjusting the rears.I've seen two instances where the Teds floaters were a problem,and one turned out to be worn adjuster housings.I didn't find the problem,another mechanic friend did.The other time I did find the problem.I adjusted the brakes as they were supposed to be done,and the problem went away.The owner had been using that board,and it is just too much of an arbitrary tool that makes no allowances for uneven wear.

03-26-2023, 11:41 PM	#14
1928 Sport Coupe Member Join Date: May 2022 Location: Ohio Posts: 41	Re: Brake improvement for Model A's I looked at Flathead Ted's website and tried to read about the different kits. I am still thinking on it. Another question I have. Which lining is better the molded or the woven? I do not tour with the car, i just drive it for pleasure. Probably no more than 40 miles from home. I think I will rebuild the brakes back to new stock condition plus the new cast drums. Of course that means new bushings, brake rods (mine have been bent to adjust in the past), and anything that is worn or broken and beyond repair. I may also try the rear levers on the front. I want to have the best brakes I can without changing the mechanical brakes to Hydraulic. I want the car to look stock. Thanks again.

03-27-2023, 05:37 AM	#16
updraught Senior Member Join Date: Feb 2015 Location: Australia Posts: 1,851	Re: Brake improvement for Model A's https://youtu.be/lcJ5LUbmro0 https://youtu.be/2EjRe411l3M You'll need to watch both. You can get shoes from Randy that are matched to the drum. I was told in my youth, linings needs to be soft. Use hard at your own peril.

03-27-2023, 06:57 AM	#17
BIG KEV Junior Member Join Date: Dec 2021 Location: Spring Tx Posts: 26	Re: Brake improvement for Model A's The real brake upgrade is the 1932 and up brakes. I swapped my fronts to the 32 brakes and the difference is hands down amazing. The floaters do help either these or the stocks for sure... Also ditch stamped steel drums indefinitely.

04-04-2023, 10:38 AM	#20
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,250	Re: Brake improvement for Model A's I'm with Big Kev, I put 35 brakes on front of my coupe this winter...What a difference !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode